Touchscreen mode - Revision history

G8GKQ at 11:42, 15 July 2017

2017-07-15T11:42:42Z

G8GKQ at 20:58, 3 January 2017

2017-01-03T20:58:46Z

G8GTZ at 18:19, 3 January 2017

2017-01-03T18:19:04Z

G8GTZ at 18:18, 3 January 2017

2017-01-03T18:18:31Z

G8GTZ at 18:13, 3 January 2017

2017-01-03T18:13:35Z

G8GTZ at 18:11, 3 January 2017

2017-01-03T18:11:38Z

G8GTZ: Created page with "Providing you have selected the correct mode during initial set up"

2017-01-03T17:24:10Z

Created page with "Providing you have selected the correct mode during initial set up"

New page

Providing you have selected the correct mode during initial set up

@@ Line 1: / Line 1: @@
-Providing you have selected the correct mode during initial set up the Portsdown transmitter will automatically boot up in to Touch screen mode with the following screen:
+You can set the Portsdown to boot to the touchscreen.  To set this up from the Console Menu, select Option 5, System Setup, then option 1, Autostart.  Use the arrow keys to move down to Display_boot, and then press the spacebar to select it (don't miss this step!).  Then press enter.  Next time you reboot, the Portsdown will go straight to the touchscreen.
-[[File:1-3 LCD Menu.jpg|400px]]
+The Opening menu (Menu 1) is:
-You can change the various parameters by simply touching on the screen - the chosen item will turn Green.  Use a plastic stylus to select the buttons - it makes life a lot easier!
+[[File:1-3 LCD Menu.jpg|480px]]
-'''Before pressing it, note where the TX button is as you will need it later!'''
+When ready to transmit, press the TX button which will turn red - and the screen will then display the video source.
-When ready to transmit, press the TX button which will turn red - and the screen will then display the video source.
+To go back to standby, press the touch screen anywhere - the screen will return back to the control screen.  You can change the various parameters by simply touching on the screen - the chosen item will turn Green.  Use a plastic stylus to select the buttons - it makes life a lot easier!
-To go back to rx, press the touch screen in the area where the TX button was - the screen will return back to the control screen.
+[[File:1-3 LCD Menu 2.jpg|480px]]

@@ Line 3: / Line 3: @@
 [[File:1-3 LCD Menu.jpg|400px]]
-You can change the various parameters by simply touching on the screen - the chosen item will turn Green.
+You can change the various parameters by simply touching on the screen - the chosen item will turn Green.  Use a plastic stylus to select the buttons - it makes life a lot easier!
 '''Before pressing it, note where the TX button is as you will need it later!'''

@@ Line 7: / Line 7: @@
 '''Before pressing it, note where the TX button is as you will need it later!'''
-When ready to transmit press the TX button which will turn red - and the screen will then display the video source.
+When ready to transmit, press the TX button which will turn red - and the screen will then display the video source.
 To go back to rx, press the touch screen in the area where the TX button was - the screen will return back to the control screen.

← Older revision		Revision as of 18:18, 3 January 2017
Line 2:		Line 2:

	[[File:1-3 LCD Menu.jpg\|400px]]		[[File:1-3 LCD Menu.jpg\|400px]]
		+
		+	You can change the various parameters by simply touching on the screen - the chosen item will turn Green.
		+
		+	'''Before pressing it, note where the TX button is as you will need it later!'''
		+
		+	When ready to transmit press the TX button which will turn red - and the screen will then display the video source.
		+
		+	To go back to rx, press the touch screen in the area where the TX button was - the screen will return back to the control screen.

← Older revision		Revision as of 18:13, 3 January 2017
Line 1:		Line 1:
	Providing you have selected the correct mode during initial set up the Portsdown transmitter will automatically boot up in to Touch screen mode with the following screen:		Providing you have selected the correct mode during initial set up the Portsdown transmitter will automatically boot up in to Touch screen mode with the following screen:
		+
		+	[[File:1-3 LCD Menu.jpg\|400px]]

← Older revision		Revision as of 18:11, 3 January 2017
Line 1:		Line 1:
−	Providing you have selected the correct mode during initial set up	+	Providing you have selected the correct mode during initial set up the Portsdown transmitter will automatically boot up in to Touch screen mode with the following screen: