Difference between revisions of "146 MHz amplifiers"

From BATC Wiki
Jump to navigation Jump to search
Line 23: Line 23:
  
 
* Anglia Live, suppliers of Mitsubishi power modules
 
* Anglia Live, suppliers of Mitsubishi power modules
http://www.anglia-live.com
+
https://www.anglia-live.com/Search/tier.aspx?ptag=&mfr=&kw=undefined&tierid=262&PageIndex=0&PageSize=10&orderBy=Preferred%20Order&manualFilter=&fo=Brand%3AMITSUBISHI&fo=Attributes%3A262%7CType%7C4457%7C*

Revision as of 13:20, 29 November 2020

RD series

Rob M0DTS published an easy to construct design using the RD series of FETs in CQ-TV 247 and 249 - a good way to get a clean 5 watts on 146 MHz. (The full article is available in high resolution in the magazine)

Rd70.JPG

Or have a look at M0DTS web page. http://www.m0dts.co.uk/index.php?tag=146MHz

Mitsubishi power modules

The Mitsubshi RA60H1317M 60 watt brick can be driven via the YU1LM filter and a 10 dB attenuator from the Portsdown transmitter to provide approximately 7 watts output.

146 333ks +10dB 7watts.JPG

Ready built amplifiers using this module are available from Bert Modermann PE1RKI http://www.pe1rki.com/

Minikits are a good suppler of kits = http://www.minikits.com.au/ specifically http://www.minikits.com.au/electronic-kits/rf-amplifiers/rf-high-power

For those who want to roll their own, the components are available from the following

  • Sam Jewell G4DDK, 8W amplifier kits uses the same PCB as the 60 watt version.

http://www.g4ddk.com/144MHz8WPA.pdf

  • Anglia Live, suppliers of Mitsubishi power modules

https://www.anglia-live.com/Search/tier.aspx?ptag=&mfr=&kw=undefined&tierid=262&PageIndex=0&PageSize=10&orderBy=Preferred%20Order&manualFilter=&fo=Brand%3AMITSUBISHI&fo=Attributes%3A262%7CType%7C4457%7C*