Difference between revisions of "70MHz filters"

From BATC Wiki
Jump to navigation Jump to search
(LPF filter pics)
m (BPF)
Line 13: Line 13:
 
Mini-kits sell a [https://www.minikits.com.au/electronic-kits/filter-kits/vhf-lowpass-filters/LPF7-75M low pass filter kit] described as a 75MHz 7th order Chebychev Low Pass filter.
 
Mini-kits sell a [https://www.minikits.com.au/electronic-kits/filter-kits/vhf-lowpass-filters/LPF7-75M low pass filter kit] described as a 75MHz 7th order Chebychev Low Pass filter.
  
Band pass filters may present a problem. The [https://www.qrp-labs.com/bpfkit.html QRP-Labs 12m or 10m Band pass filter kits] may be a valid point for starting on experimentation for your receiver application.
+
Band pass filters may present a problem. The [https://www.qrp-labs.com/bpfkit.html QRP-Labs 12m or 10m Band pass filter kits] may be a valid point for starting on experimentation for your receiver application. The [[71_MHz|upconverter shown on this Wiki]] contains good filtering for receive already. [https://www.antennas-amplifiers.com/4m-70mhz-bandpass-filter-receiving Antennas-amplifiers off a bandpass filter covering 70-70.5MHz] with published characteristic curves. [https://pa3csg.nl/?page_id=62 PA3CSG] has a home built band pass filter which will tune to cover 70.5 -71.5MHz.

Revision as of 18:27, 15 January 2020

Low pass filters on 4m remove signals from e.g. the broadcast radio band beginning at 88MHz.

QRP-Labs sell a Low Pass Filter kit for 4m that may be suitable for 71MHz duty with the Portsdown TX.qrp-labs.com lpf kit Low pass filter kits from QRP-Labs built by M0YDH for Portsdown TX use. 4m on left and 2m on right

Higher power duty filters. In CQ-TV 260 Charles G4GUO published a low pass filter using ATC capacitors to go in a die cast box.

G4GUO filter built by David M0YDH Spectrum analysis trace for this filter. Ref level was -14 dBm with a 10dB PAD. So -2dBm loss.


Mini-kits sell a low pass filter kit described as a 75MHz 7th order Chebychev Low Pass filter.

Band pass filters may present a problem. The QRP-Labs 12m or 10m Band pass filter kits may be a valid point for starting on experimentation for your receiver application. The upconverter shown on this Wiki contains good filtering for receive already. Antennas-amplifiers off a bandpass filter covering 70-70.5MHz with published characteristic curves. PA3CSG has a home built band pass filter which will tune to cover 70.5 -71.5MHz.