Difference between revisions of "Knucker"

From BATC Wiki
Jump to navigation Jump to search
Line 24: Line 24:
 
Charles G4GUO and the Knucker team have developed a variable bandwidth DVB-T receiver with USB interface around the Serit 4762 NIM / tuner.
 
Charles G4GUO and the Knucker team have developed a variable bandwidth DVB-T receiver with USB interface around the Serit 4762 NIM / tuner.
  
Note: the 4762 NIM is capable of DVB-T and DVB-S but the '''DVB-S is NOT supported in any BATC applications'''.
+
Draft specifications are 100KHz to 2MHz wide OFDM, frequency range 44 to 1002MHz
 +
 
 +
Note: the 4762 NIM is capable of DVB-T and DVB-S but the '''DVB-S is NOT (repeat NOT) supported in any BATC applications'''.
  
 
The PCB design by Mike G0MJW is based on the MiniTiouner Version 2 board - the photo shows the first built and tested prototype .
 
The PCB design by Mike G0MJW is based on the MiniTiouner Version 2 board - the photo shows the first built and tested prototype .

Revision as of 09:48, 29 December 2020

The Knucker project is to develop a variable bandwidth DVB-T USB receiver and transmitter for use on the lower VHF bands and HF. It will also have applications for mobile stations on 437MHz and above.

Why Knucker

Why not?

Knucker is a dialect word for a kind of water dragon, living in knuckerholes in Sussex and Charles, the lead developer, also lives in Sussex....

https://en.wikipedia.org/wiki/Knucker


Knucker dragon.jpg

Timescales

December 2020 - Currently the project is at the design phase with a proof of concept receiver working on bread board hardware.

Receiver

Hardware

Knucker assembled V1 PCB.jpg

Charles G4GUO and the Knucker team have developed a variable bandwidth DVB-T receiver with USB interface around the Serit 4762 NIM / tuner.

Draft specifications are 100KHz to 2MHz wide OFDM, frequency range 44 to 1002MHz

Note: the 4762 NIM is capable of DVB-T and DVB-S but the DVB-S is NOT (repeat NOT) supported in any BATC applications.

The PCB design by Mike G0MJW is based on the MiniTiouner Version 2 board - the photo shows the first built and tested prototype .

BOM and schematics are available here: File:Knucker.xlsx

Software

It is intended to develop a core Linux DVB-T receiver application that will be integrated into the LongMynd receiver core.

It is planned that the Portsdown DATV system will be enhanced to include the DVB-T receiver.

It is envisaged that a set-top box version of the code will be developed using the RydePlayer and would be known as the Knucker receiver.

Transmit

DATVexpress

Charles G4GUO is currently developing a variable bandwidth OFDM version of the DATVexpress software. This will work with the DATVExpress card, Pluto and Lime SDR.

Beta testing

We will be looking for technically competent people to help test the system in it's intended applications - low band VHF, HF and mobile.

Send us an email if you are interested in helping.

Applications

DX!!

DVB-T can be used in environments where phase distortion and multi-pathing means DVB-S does not work. Typical applications include mobile video transmissions and bands below 70MHz :-)