Difference between revisions of "MiniTiouner hardware Version 1"

From BATC Wiki
Jump to navigation Jump to search
Line 15: Line 15:
 
===Serit NIM Adapter card===
 
===Serit NIM Adapter card===
  
Due to a different pinouts from the Sharp NIM, the Serit NIM, which is the only NIM on sale in the BATC shop, needs a simple adapter board to enable it to be plugged in to the original MiniTiouner PCB available from the BATC shop.
+
Due to the Sharp NIM going obsolete, from Jan 2017 the BATC only sells a NIM from Serit.  However as the pinout is different between the 2 units, a simple adapter board to enable the Serit NIM to be plugged in to the original MiniTiouner PCB.
  
 
[[File:Serit.JPG|400px]]
 
[[File:Serit.JPG|400px]]

Revision as of 19:41, 30 April 2017

The original MiniTiouner hardware launched in 2015 used a PCB designed by Brian G4 EWJ to enable easy home construction of the MiniTiouner hardware and components for over 200 units have been sold around the world.

IMAG0218.jpg

All the project documentation is available for download in the zip file:

File:MTK1 Instructions v1-9, Parts v5, Overlay, Schematic v1.zip

Colin G4KLB has done an excellent video on constructing the MiniTiouner: https://www.youtube.com/watch?v=vXUIQPeslwM

Compatible NIM

The version 1 PCB was designed for use with the Sharp and Edeartek tuner NIMs available from the BATC shop in 2015 and 2016.

Serit NIM Adapter card

Due to the Sharp NIM going obsolete, from Jan 2017 the BATC only sells a NIM from Serit. However as the pinout is different between the 2 units, a simple adapter board to enable the Serit NIM to be plugged in to the original MiniTiouner PCB.

Serit.JPG

Brian G4EWJ has designed a PCB and the blank board and the Serit FTS-4335V NIM is available in the BATC shop.

You only require the adaptor PCB if you are upgrading a MiniTiouner version 1 hardware to use the Serit tuner.

The adapter card build instructions, Parts List, Schematic and silkscreen print are in this zip file. NOTE - the kit referred to in the documentation is no longer available:

media:Serit_FTS4335V_Converter_Kit_MTK2_Instructions_v1-07_Parts_Build_A1_v1_Schematic_A1_v2_Silkscreen.zip

Note:  As of April 2017 a new main PCB has been designed to directly take the Serit tuner - any new constructors should use this version 2 new board which will not need the adapter PCB.

Please use the BATC forum for any feedback on this project http://www.batc.org.uk/forum/viewtopic.php?f=15&t=4853


When you have built your MiniTiouner, you can check it using the software "TestMyMiniTiouner" included in the Minitioune software package.