Difference between revisions of "Noise Source PSU"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
This simple unit is designed to switch a 28v (or 12v) supply for a Noise Source and be controlled by the Portsdown NF Meter. The input switching signal is 0v for the "off" state and 3.3v for the "on" state. | This simple unit is designed to switch a 28v (or 12v) supply for a Noise Source and be controlled by the Portsdown NF Meter. The input switching signal is 0v for the "off" state and 3.3v for the "on" state. | ||
| + | |||
| + | [[File:Noise Head PSU.jpg|437px]] | ||
The simple schematic is here [[:Media:NoiseHeadPSU.pdf]] | The simple schematic is here [[:Media:NoiseHeadPSU.pdf]] | ||
| − | The Bill of Materials is here. | + | The Bill of Materials is here. [[:File:NF Switch BOM.xlsx]] |
===Error on the First Batch of PCBs=== | ===Error on the First Batch of PCBs=== | ||
Revision as of 20:13, 3 December 2021
This simple unit is designed to switch a 28v (or 12v) supply for a Noise Source and be controlled by the Portsdown NF Meter. The input switching signal is 0v for the "off" state and 3.3v for the "on" state.
The simple schematic is here Media:NoiseHeadPSU.pdf
The Bill of Materials is here. File:NF Switch BOM.xlsx
Error on the First Batch of PCBs
The Initial batch of PCBs for the Noise source power supply had one error. The Vout and Adj pins on the current-limiting LM317T (U2) were reversed. The unit functions if assembled with the error, but the current limit will not work correctly. To correct the error, the PCB should be modified as shown below, or pins 1 and 2 on U2 should be swapped.