Difference between revisions of "PE4302"

From BATC Wiki
Jump to navigation Jump to search
m (add link to my film)
(Old versions of MPLAB IDE)
Line 15: Line 15:
  
 
[https://www.youtube.com/watch?v=hKBr4Zmau5c A video demonstrating the attenuator and controller is here.]
 
[https://www.youtube.com/watch?v=hKBr4Zmau5c A video demonstrating the attenuator and controller is here.]
 +
 +
Old versions of the MPLAB IDE software are best for simply loading a .hex file on a device [V8.91 of the MPLAB IDE is a disaster]. Look for v3.00 or v3.35. Download and install one of these and use the IPE following the steps in Bas' video.

Revision as of 18:00, 29 September 2021

A few files for the PE4302 Variable attenuator controller project, the PE4302 is available built from ebay this project is to control it IMAG0862.jpg File:PE4302 Attenuator.pdf File:PE4302 LCD Schematic V1.1.pdf File:PE4302 LCD template.pdf File:PE4302 Schematic Vero 3V3 v11.pdf File:PE4302 Schematic Vero 5V v11.pdf File:PE4302 LCD PARTS.xls

The .hex file for people to download is here File:PE4302 Serial Controller V4.HEX

Below is a view of the lid removed to show DIP switches 1 and 2 are turned off, solder removed from pads J5 and J6 and added to J4 to ready the attenuator for serial control with the above project. Photo :- G4KLB

PE4032 DIP & SOLDER BLOB Settings.JPG

A video demonstrating the attenuator and controller is here.

Old versions of the MPLAB IDE software are best for simply loading a .hex file on a device [V8.91 of the MPLAB IDE is a disaster]. Look for v3.00 or v3.35. Download and install one of these and use the IPE following the steps in Bas' video.