Difference between revisions of "PE4302"

From BATC Wiki
Jump to: navigation, search
(attenuator preparation)
Line 9: Line 9:
  
 
The .hex file for people to download is here [[:File:PE4302 Serial Controller V4.HEX]]
 
The .hex file for people to download is here [[:File:PE4302 Serial Controller V4.HEX]]
 +
 +
Below is a view of the lid removed to show DIP switches 1 and 2 are turned off, solder removed from pads J5 and J6 and added to J4 to ready the attenuator for serial control with the above project. Photo :- G4KLB
 +
 +
[[File:PE4032_DIP_%26_SOLDER_BLOB_Settings.JPG|400px]]

Revision as of 21:56, 17 October 2017

A few files for the PE4302 Variable attenuator controller project, the PE4302 is available built from ebay this project is to control it IMAG0862.jpg File:PE4302 Attenuator.pdf File:PE4302 LCD Schematic V1.1.pdf File:PE4302 LCD template.pdf File:PE4302 Schematic Vero 3V3 v11.pdf File:PE4302 Schematic Vero 5V v11.pdf File:PE4302 LCD PARTS.xls

The .hex file for people to download is here File:PE4302 Serial Controller V4.HEX

Below is a view of the lid removed to show DIP switches 1 and 2 are turned off, solder removed from pads J5 and J6 and added to J4 to ready the attenuator for serial control with the above project. Photo :- G4KLB

PE4032 DIP & SOLDER BLOB Settings.JPG