PE4302

From BATC Wiki
Revision as of 18:05, 29 September 2021 by M0YDH (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

A few files for the PE4302 Variable attenuator controller project, the PE4302 is available built from ebay this project is to control it IMAG0862.jpg File:PE4302 Attenuator.pdf File:PE4302 LCD Schematic V1.1.pdf File:PE4302 LCD template.pdf File:PE4302 Schematic Vero 3V3 v11.pdf File:PE4302 Schematic Vero 5V v11.pdf File:PE4302 LCD PARTS.xls

The .hex file for people to download is here File:PE4302 Serial Controller V4.HEX

Below is a view of the lid removed to show DIP switches 1 and 2 are turned off, solder removed from pads J5 and J6 and added to J4 to ready the attenuator for serial control with the above project. Photo :- G4KLB

PE4032 DIP & SOLDER BLOB Settings.JPG

A video demonstrating the attenuator and controller is here.

Old versions of the MPLAB IDE software are best for simply loading a .hex file on a device (V8.91 of the MPLAB IDE is a disaster). Look for v3.00 or v3.35. Download and install one of these and use the IPE following the steps in Bas' video. This includes coping with the deficiencies of fake PICkit 3 programmers.