Ryde GPIO Connections

From BATC Wiki
Jump to navigation Jump to search

RPi 4 GPIO pin out

GPIO-Pinout-Diagram-2.png

  • Note the Rpi4 (only) can be powered with 5v directly on to GPIO 2 and 4.

Proposed GPIO Connections for the Ryde Receiver

Here is the proposed list of GPIO connections:

Pin No BCM No Wiring Pi RPi Pri RPi Alt0 Primary Use Secondary Use Notes
1 - - 3.3v - - - -
2 - - 5v - - - -
3 2 8 GPIO 2 SDA1 - - -
4 - - 5v - - - -
5 3 9 GPIO 3 SCL1 - - -
6 - - 0v - - - -
7 4 7 GPIO 4 GPCLK0 Valid RX Signal - Active High
8 14 15 GPIO 14 TXD0 - - -
9 - - 0v - - - -
10 15 16 GPIO 15 RXD0 - - -
11 17 0 GPIO 17 FL1 IR Sensor Input Active low
12 18 1 GPIO 18 PCM_CLK Button - Up - Active low
13 27 2 GPIO 27 SD0_DAT3 Button - Down - Active low
14 - - 0v - - - -
15 22 3 GPIO 22 SD0_CLK Button - Left - Active low
16 23 4 GPIO 23 SD0_CMD Button - Right - Active low
17 - - 3.3v - - - -
18 24 5 GPIO 24 SD0_DAT0 Button - Select - Active low
19 10 12 GPIO 10 SPI0_MOSI - - -
20 - - 0v - - - -
21 9 13 GPIO 9 SPI0_MISO - - -
22 25 6 GPIO 25 SD0_DAT1 Button - Back - Active low
23 11 14 GPIO 11 SPI0_SCLK - - -
24 8 10 GPIO 8 SPI0_CE0_N - - -
25 - - 0v - - - -
26 7 11 GPIO 7 SPI0_CE1_N - - -
27 0 30 ID_SD SDA0 Reserved - -
28 1 31 ID_SC SCL0 Reserved - -
29 5 21 GPIO 5 GPCLK0 Button - Menu - Active low
30 - - 0v - - - -
31 6 22 GPIO 6 GPCLK2 Button - Mute - Active Low
32 12 26 GPIO 12 PWM0 Band LSB - -
33 13 23 GPIO 13 PWM1 Band NSB - -
34 - - 0v - - - -
35 19 24 GPIO 19 PCM_FS Band MSB - -
36 16 27 GPIO 16 FL0 Button - Power - Active low
37 26 25 GPIO 26 SD0_DAT2 Button - OSD Info - Active low
38 20 28 GPIO 20 PCM_DIN - - Future Use?
39 - - 0v - - - -
40 21 29 GPIO 21 PCM_DOUT - - Future Use?

Note that the GPIO pin names are markedly different from the RPi 3B. Each pin on the RPi4 GPIO can be referred to in 4 ways: its physical pin number, the Broadcom I/O number, the Wiring Pi number or the primary or alternate names. Source for GPIO designations was the Raspberry Pi 4 Model B datasheet.