Difference between revisions of "Ryde Hardware"
Jump to navigation
Jump to search
(Created page with "The Ryde Receiver is based around a Raspberry Pi 4 (exact model to be decided). The prototype hardware is shown here 765px") |
|||
| Line 1: | Line 1: | ||
The Ryde Receiver is based around a Raspberry Pi 4 (exact model to be decided). | The Ryde Receiver is based around a Raspberry Pi 4 (exact model to be decided). | ||
| − | The prototype hardware is shown here | + | The hardware currently required is as follows - note this may change and you buy at your on risk! |
| + | |||
| + | * Rapberry Pi4 and heatsink / fan | ||
| + | * Sandisk Ultra 8GB+ SD card | ||
| + | * Micro to standard HDMI converter | ||
| + | * IR receiver and remote control | ||
| + | * MiniTiouner V2 hardware - note current beta models connect via USB | ||
| + | |||
| + | Most of the early development protypes are being hosted on old STB cases - these provide a case, possibly a PSU and IR detector diode and front panel switches. | ||
| + | |||
| + | An example prototype hardware is shown here: | ||
[[File:Inside Case Small.jpg|765px]] | [[File:Inside Case Small.jpg|765px]] | ||
Revision as of 12:19, 14 July 2020
The Ryde Receiver is based around a Raspberry Pi 4 (exact model to be decided).
The hardware currently required is as follows - note this may change and you buy at your on risk!
- Rapberry Pi4 and heatsink / fan
- Sandisk Ultra 8GB+ SD card
- Micro to standard HDMI converter
- IR receiver and remote control
- MiniTiouner V2 hardware - note current beta models connect via USB
Most of the early development protypes are being hosted on old STB cases - these provide a case, possibly a PSU and IR detector diode and front panel switches.
An example prototype hardware is shown here:
