Difference between revisions of "Ryde remote controls"
Jump to navigation
Jump to search
(Created page with "The Ryde DATV receiver is designed to work with an Infrared remote control handset. ===InfraRed sensor=== A Infrared sensor is needed and can be one salvaged from an old con...") |
|||
| Line 1: | Line 1: | ||
The Ryde DATV receiver is designed to work with an Infrared remote control handset. | The Ryde DATV receiver is designed to work with an Infrared remote control handset. | ||
| − | === | + | ===Infrared sensor=== |
A Infrared sensor is needed and can be one salvaged from an old consumer electronic part or purchased new - typical example is https://uk.farnell.com/vishay/tsop2438/ir-receiver-45m-0-12mw-m2-side/dp/4913097 | A Infrared sensor is needed and can be one salvaged from an old consumer electronic part or purchased new - typical example is https://uk.farnell.com/vishay/tsop2438/ir-receiver-45m-0-12mw-m2-side/dp/4913097 | ||
| − | + | [[File:Infrared-Sensors.jpg|400px]] | |
| + | |||
| + | These sensors are 3 legged devices with +ve, gnd and output which is connected directly to pin x of the RPi GPIO port. | ||
| + | |||
| + | Older devices may need to be used on a +5v supply and if that | ||
Revision as of 12:58, 14 July 2020
The Ryde DATV receiver is designed to work with an Infrared remote control handset.
Infrared sensor
A Infrared sensor is needed and can be one salvaged from an old consumer electronic part or purchased new - typical example is https://uk.farnell.com/vishay/tsop2438/ir-receiver-45m-0-12mw-m2-side/dp/4913097
These sensors are 3 legged devices with +ve, gnd and output which is connected directly to pin x of the RPi GPIO port.
Older devices may need to be used on a +5v supply and if that