Difference between revisions of "SUP2400 DiSEqC"

From BATC Wiki
Jump to navigation Jump to search
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band. Luckily there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box. The units are made by a company called Zinwell and known as SUP-2400. They are available on ebay but only in the US and so are stocked in the [https://batc.org.uk/shop/hardware-and-kits BATC shop].
+
In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band.  
  
However, before use on 70cms, they either require hardware modification as described in CQ-TV 239 and [[SUP2400 mods|available here]], or the use of the Diseqc controller by G7DOE as described in CQ-TV 250 to work on DATV.
+
Luckily there is a consumer device called the SUP2400 available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box.  They are available on ebay but only in the US.
  
This page lists details of PCBs for Ron's (G7DOE) SUP2400 DiSEqC controller.
+
The SUP2400 was designed to be controlled by the STB using [https://en.wikipedia.org/wiki/DiSEqC Disecq commands] which the STB sent down the co-ax cable connecting the 2 units when frequency up conversion is required.  As we did not originally know the Disecq commands used M0DTS figured out a series of hardware modifications to force the SUP2400 to upconvert the incoming 70cms signal.  These hardware modification are described in [https://batc.org.uk/wp-content/uploads/cq-tv250-1.pdf CQ-TV 239] and [[SUP2400 mods|available here]].
  
 +
Ron G7DOE investigated further and designed a small PIC based Diseqc controller as described in [https://batc.org.uk/wp-content/uploads/cq-tv250-1.pdf CQ-TV 250] which does away with the hardware modifications.
 +
 
Through hole version to make yourself:
 
Through hole version to make yourself:
  
Line 20: Line 22:
 
[[:File:SUP2400 DiSEqC bottom.pdf]]
 
[[:File:SUP2400 DiSEqC bottom.pdf]]
  
I have some commercially manufactured PCBs of this type contact G4KLB if you would like one - will post some pictures on the BATC forum in due course.
+
I have some commercially manufactured PCBs of this type contact G4KLB if you would like one.

Latest revision as of 11:43, 26 February 2019

In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band.

Luckily there is a consumer device called the SUP2400 available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box. They are available on ebay but only in the US.

The SUP2400 was designed to be controlled by the STB using Disecq commands which the STB sent down the co-ax cable connecting the 2 units when frequency up conversion is required. As we did not originally know the Disecq commands used M0DTS figured out a series of hardware modifications to force the SUP2400 to upconvert the incoming 70cms signal. These hardware modification are described in CQ-TV 239 and available here.

Ron G7DOE investigated further and designed a small PIC based Diseqc controller as described in CQ-TV 250 which does away with the hardware modifications.

Through hole version to make yourself:

File:SUP2400 DiSEqC Thru Hole PARTS.xls File:SUP2400 DiSEqC Thru Hole ETCH.pdf

A surface mount version that can be coax powered or externally powered

File:SUP2400 DiSEqC.xls

PCB

File:SUP2400 DiSEqC top.pdf

File:SUP2400 DiSEqC bottom.pdf

I have some commercially manufactured PCBs of this type contact G4KLB if you would like one.