Difference between revisions of "SUP2400 mods"
Jump to navigation
Jump to search
(Created page with "In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band. Luckily there is a consumer device available in the USA whic...") |
|||
| (9 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band | + | In order to receive 437 MHz (70cms) DATV on a standard satellite STB or MiniTioune, you need to up convert the signal to L band. |
| − | + | Luckily there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box. | |
| − | |||
| − | This | + | However, before use on 70cms, they either require hardware modification as described in CQ-TV 239 or the use of the Diseqc controller as described in CQ-TV 250. |
| + | |||
| + | * [[SUP2400 DiSEqC| This page on the wiki describes the Disecq controller]] | ||
| + | |||
| + | * [[:Media:Zinwell 70cms DATV up converter CQTV v2.pdf|Details of the hardware modifications are available here.]] | ||
Latest revision as of 12:46, 10 November 2019
In order to receive 437 MHz (70cms) DATV on a standard satellite STB or MiniTioune, you need to up convert the signal to L band.
Luckily there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box.
However, before use on 70cms, they either require hardware modification as described in CQ-TV 239 or the use of the Diseqc controller as described in CQ-TV 250.