Difference between revisions of "SUP2400 mods"

From BATC Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band. Luckily there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box. The units are made by a company called Zinwell and known as SUP-2400. They are available on ebay but only in the US and so are stocked in the [https://batc.org.uk/shop/hardware-and-kits BATC shop].
 
In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band. Luckily there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box. The units are made by a company called Zinwell and known as SUP-2400. They are available on ebay but only in the US and so are stocked in the [https://batc.org.uk/shop/hardware-and-kits BATC shop].
  
However, before use on 70cms, they either require hardware modification as described in CQ-TV 239, or the use of the Diseqc controller as described in CQ-TV 249 - [[SUP2400 DiSEqC|details available here]] - to work on DATV.
+
However, before use on 70cms, they either require hardware modification as described in CQ-TV 239 and the document available for download further down this page, or the use of the Diseqc controller as described in CQ-TV 249 - [[SUP2400 DiSEqC|details available here]] - to work on DATV.
  
 
[[:Media:Zinwell 70cms DATV up converter CQTV v2.pdf|This document describes the hardware modifications.]]
 
[[:Media:Zinwell 70cms DATV up converter CQTV v2.pdf|This document describes the hardware modifications.]]

Revision as of 19:35, 29 September 2016

In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band. Luckily there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box. The units are made by a company called Zinwell and known as SUP-2400. They are available on ebay but only in the US and so are stocked in the BATC shop.

However, before use on 70cms, they either require hardware modification as described in CQ-TV 239 and the document available for download further down this page, or the use of the Diseqc controller as described in CQ-TV 249 - details available here - to work on DATV.

This document describes the hardware modifications.