Difference between revisions of "Serit tuner"

From BATC Wiki
Jump to navigation Jump to search
Line 4: Line 4:
  
 
Also, due to a different pinouts from the Sharp NIM, the Serit tuner will also need a simple adapter board to enable it to be plugged in to the Minituner standard hardware - Brian G4EWJ has designed a board and they are currently being made in China.  The board and a full set of components plus the Serit tuner will be available in the BATC shop.
 
Also, due to a different pinouts from the Sharp NIM, the Serit tuner will also need a simple adapter board to enable it to be plugged in to the Minituner standard hardware - Brian G4EWJ has designed a board and they are currently being made in China.  The board and a full set of components plus the Serit tuner will be available in the BATC shop.
 +
  
 
[[File:20170115_171905.jpg|400px]]
 
[[File:20170115_171905.jpg|400px]]
  
 
Details of the Serit tuner and adaptor board will be posted here.
 
Details of the Serit tuner and adaptor board will be posted here.

Revision as of 08:56, 22 February 2017

As of February 2017 the Sharp and Samsung tuners are no longer available and the Minituner project will use a tuner from Serit which cover from 140MHz right through to 2650 MHz without the need for any upconverters.

This makes building a receiver for 146 or 437 much easier, although you will need a pre-amp followed by lots of filtering for each band, just like the Sharp did, and probably followed by a Satellite line amp from ebay as the Serit has less gain than the Sharp.

Also, due to a different pinouts from the Sharp NIM, the Serit tuner will also need a simple adapter board to enable it to be plugged in to the Minituner standard hardware - Brian G4EWJ has designed a board and they are currently being made in China. The board and a full set of components plus the Serit tuner will be available in the BATC shop.


20170115 171905.jpg

Details of the Serit tuner and adaptor board will be posted here.