Difference between revisions of "Talk:RBTVMOD"

From BATC Wiki
Jump to navigation Jump to search
Line 6: Line 6:
  
 
Silkscreen is here [[:File:RBTVMOD V22 Silk screen.png]]
 
Silkscreen is here [[:File:RBTVMOD V22 Silk screen.png]]
 +
 +
For those who want to make there own PCBs, the artwork is here [[:File:RBTVMOD V22 copper.pdf]]
 +
There are some fairly small traces close together 
  
 
== V21 OFFSET BALANCE TEST POINTS ==
 
== V21 OFFSET BALANCE TEST POINTS ==

Revision as of 17:18, 26 May 2016

Here is the Bill of Materials to build the RBTVMOD project File:RBTVMOD V21.xls

The circuit diagram is in two parts this is the first part File:RBTVMOD V21 Sht 1.pdf

And this is the 2nd part File:RBTVMOD V21 Sht 2.pdf

Silkscreen is here File:RBTVMOD V22 Silk screen.png

For those who want to make there own PCBs, the artwork is here File:RBTVMOD V22 copper.pdf There are some fairly small traces close together

V21 OFFSET BALANCE TEST POINTS

One of the test points was incorrect on the PCB (The Q-) see File:V21 OFFSET BALANCE TEST POINTS.png

V21 OFFSET BALANCE TEST POINTS.png

A printer friendly version here File:V21 OFFSET BALANCE TEST POINTS pf.png

Parts ordering from BOM

Making up kits of parts for projects is time consuming and expensive, an alternative is to supply a BOM (Bill Of Materials) that can be uploaded to a supplier, they will effectively make up the kit of parts for you! and even print the part No on the packets ( such as R1,R2 etc.)

The word file File:Using the DigiKey BOM Manager.doc shows how to do this for RBTVMOD when ordering from DigiKey.