Difference between revisions of "The Portsdown Receiver"

From BATC Wiki
Jump to navigation Jump to search
m
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The receiver was launched in CQ-TV 265.  
+
The receiver was launched in CQ-TV 265 and fully incorporated into Portsdown 2019 Version 201910230 and later versions.  
  
It uses the LongMynd receiver software written by Heather M0HMO.  The source code is at https://github.com/myorangedragon/longmynd .  
+
It uses the LongMynd receiver software written by Heather M0HMO.  The original source code is at https://github.com/myorangedragon/longmynd , but it is now installed automatically during any Portsdown build or update.
 +
 
 +
Selection of the RX button on Menu 1 takes you to the Portsdown Receiver menu.  Access to the previous LeanDVB receiver is retained through a new Button on Menu 2. The Portsdown Receiver Menu changes between frequencies and settings for QO-100 and Terrestrial DATV when the top LH button is pressed.
  
The Rx menu changes from Lean DVB receiver to Portsdown Receiver when a Minitiouner is connected to the USB hub of your Portsdown. Menu changes between frequencies and settings for QO-100 and Terrestrial DATV when the top LH button is pressed.
 
 
[[File:M0YDH_QO-100_Rx_menu.jpg|480px]]
 
[[File:M0YDH_QO-100_Rx_menu.jpg|480px]]
  
Line 11: Line 12:
  
 
[[File:LongMynd_1st_pictures.jpg|480px]]
 
[[File:LongMynd_1st_pictures.jpg|480px]]
 +
 +
The data overlayed on the image can be hidden by touching the left hand side of the screen; touching the right hand side of the screen stops the receiver and returns to the receiver menu.  If using the VLC player (which will successfully show some H265 signals) the data is always obscured by the picture and cannot be unhidden.

Latest revision as of 13:02, 11 May 2020

The receiver was launched in CQ-TV 265 and fully incorporated into Portsdown 2019 Version 201910230 and later versions.

It uses the LongMynd receiver software written by Heather M0HMO. The original source code is at https://github.com/myorangedragon/longmynd , but it is now installed automatically during any Portsdown build or update.

Selection of the RX button on Menu 1 takes you to the Portsdown Receiver menu. Access to the previous LeanDVB receiver is retained through a new Button on Menu 2. The Portsdown Receiver Menu changes between frequencies and settings for QO-100 and Terrestrial DATV when the top LH button is pressed.

M0YDH QO-100 Rx menu.jpg

M0YDH TERRESTRIAL RX MENU.jpg

On terrestrial choose a frequency, symbol rate and player or UDP stream. The software searches for a frequency lock and displays received TV some seconds later.

LongMynd 1st pictures.jpg

The data overlayed on the image can be hidden by touching the left hand side of the screen; touching the right hand side of the screen stops the receiver and returns to the receiver menu. If using the VLC player (which will successfully show some H265 signals) the data is always obscured by the picture and cannot be unhidden.