Difference between revisions of "Touchscreen mode"

From BATC Wiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
Providing you have selected the correct mode during initial set up the Portsdown transmitter will automatically boot up in to Touch screen mode with the following screen:
+
You can set the Portsdown to boot to the touchscreen.  To set this up from the Console Menu, select Option 5, System Setup, then option 1, Autostart.  Use the arrow keys to move down to Display_boot, and then press the spacebar to select it (don't miss this step!).  Then press enter.  Next time you reboot, the Portsdown will go straight to the touchscreen.
  
[[File:1-3 LCD Menu.jpg|400px]]
+
The Opening menu (Menu 1) is:
  
You can change the various parameters by simply touching on the screen - the chosen item will turn Green.
+
[[File:1-3 LCD Menu.jpg|480px]]
  
'''Before pressing it, note where the TX button is as you will need it later!'''
+
When ready to transmit, press the TX button which will turn red - and the screen will then display the video source.
  
When ready to transmit, press the TX button which will turn red - and the screen will then display the video source.
+
To go back to standby, press the touch screen anywhere - the screen will return back to the control screen.  You can change the various parameters by simply touching on the screen - the chosen item will turn Green. Use a plastic stylus to select the buttons - it makes life a lot easier!
 +
 
 +
You can also select Menu 2 (M2) to change other parameters, and shutdown or reboot:
  
To go back to rx, press the touch screen in the area where the TX button was - the screen will return back to the control screen.
+
[[File:1-3 LCD Menu 2.jpg|480px]]

Latest revision as of 11:42, 15 July 2017

You can set the Portsdown to boot to the touchscreen. To set this up from the Console Menu, select Option 5, System Setup, then option 1, Autostart. Use the arrow keys to move down to Display_boot, and then press the spacebar to select it (don't miss this step!). Then press enter. Next time you reboot, the Portsdown will go straight to the touchscreen.

The Opening menu (Menu 1) is:

1-3 LCD Menu.jpg

When ready to transmit, press the TX button which will turn red - and the screen will then display the video source.

To go back to standby, press the touch screen anywhere - the screen will return back to the control screen. You can change the various parameters by simply touching on the screen - the chosen item will turn Green. Use a plastic stylus to select the buttons - it makes life a lot easier!

You can also select Menu 2 (M2) to change other parameters, and shutdown or reboot:

1-3 LCD Menu 2.jpg