Touchscreen mode

Providing you have selected the correct mode during initial set up the Portsdown transmitter will automatically boot up in to Touch screen mode with the following screen:

You can change the various parameters by simply touching on the screen - the chosen item will turn Green. Use a plastic stylus to select the buttons - it makes life a lot easier!

Before pressing it, note where the TX button is as you will need it later!

When ready to transmit, press the TX button which will turn red - and the screen will then display the video source.

To go back to rx, press the touch screen in the area where the TX button was - the screen will return back to the control screen.