Difference between revisions of "Transmitting Oscar 100 DATV signals"

From BATC Wiki
Jump to navigation Jump to search
(Created page with "To transmit DATV signals on Oscar 100 you need to be able to generate DVB-S2 signals on ~2400 MHz. This page outlines some possible transmit systems. ==Portsdown system== T...")
 
Line 1: Line 1:
 
To transmit DATV signals on Oscar 100 you need to be able to generate DVB-S2 signals on ~2400 MHz.  This page outlines some possible transmit systems.
 
To transmit DATV signals on Oscar 100 you need to be able to generate DVB-S2 signals on ~2400 MHz.  This page outlines some possible transmit systems.
  
==Portsdown system==
+
For a full guide to transmitting on Oscar100 see CQ-TV 263.
  
The BATC Portsdown system
+
==DATV transmit systems==
 +
To transmit DATV on Oscar 100 you will need a system to generate DVB S or DVB-S2 (preffered) on 2400MHz.
 +
 
 +
[[File:Tyoical 100 transmit.jpg|400px]]
 +
 
 +
 
 +
Systems include:
 +
 
 +
===Portsdown system===
 +
 
 +
The BATC Portsdown 2019 system using the LimeSDR mini
 +
 
 +
 
 +
==Dish size and power required==
 +
 
 +
There are 3 key variables: dish size, power and symbol rate.  The power received at the satellite varies with the square of the dish diameter, so for example a 1.2m dish will give 4 times the amount of power (6 dB more) than a 60 cm dish.  The power density in terms of frequency will vary inversely proportional to the symbol rate.  So a 250 KS signal will deliver double the power density (watts per MHz) at the satellite compared to a 500 KS signal of the same transmitted power. 
 +
 
 +
Based on observed performance of the transponder, this table gives the power required and dish size to achieve the same level as the beacon at 250 KS:
 +
 
 +
[[File:dish size.JPG|400px]]

Revision as of 09:29, 23 April 2019

To transmit DATV signals on Oscar 100 you need to be able to generate DVB-S2 signals on ~2400 MHz. This page outlines some possible transmit systems.

For a full guide to transmitting on Oscar100 see CQ-TV 263.

DATV transmit systems

To transmit DATV on Oscar 100 you will need a system to generate DVB S or DVB-S2 (preffered) on 2400MHz.

Tyoical 100 transmit.jpg


Systems include:

Portsdown system

The BATC Portsdown 2019 system using the LimeSDR mini


Dish size and power required

There are 3 key variables: dish size, power and symbol rate. The power received at the satellite varies with the square of the dish diameter, so for example a 1.2m dish will give 4 times the amount of power (6 dB more) than a 60 cm dish. The power density in terms of frequency will vary inversely proportional to the symbol rate. So a 250 KS signal will deliver double the power density (watts per MHz) at the satellite compared to a 500 KS signal of the same transmitted power.

Based on observed performance of the transponder, this table gives the power required and dish size to achieve the same level as the beacon at 250 KS:

Dish size.JPG