Difference between revisions of "Use With a DTX-1"

From BATC Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
As of Software Version 201710080 (not yet released), the Portsdown software can be used to transmit H264 encoded pictures with a DTX-1.  This experimental capability is NOT compatible with the use of WaveShare touchscreen and must be controlled from the Console.  If you select DTX-1 as the output mode with a touchscreen connected, the touchscreen will become unusable as soon as you got to transmit, as some of the pins used for the screen are the same as those used for sending signals to the DTX-1.
+
As of Software Version 201710081, the Portsdown software can be used to transmit MPEG-2 or H264 encoded pictures with a DTX-1.  This experimental capability is NOT compatible with the use of WaveShare touchscreen and must be controlled from the Console or an Official Raspberry Pi 7" touchscreen (often referred to as a "7 inch Element 14 touchscreen").  If you select DTX-1 as the output mode with a Waveshare touchscreen connected, the touchscreen will become unusable as soon as you got to transmit, as some of the pins used for the screen are the same as those used for sending signals to the DTX-1.
  
More details to follow.
+
Additionally, the hardware shutdown button, hardware shutdown button LED, keyed streaming, hardware keyed transmit, Attenuator and signal generator functions are inoperative due to GPIO pin conflicts.
 +
 
 +
A summary of the pin connections used is here [[PTT_and_band_switching#Summary_of_GPIO_connections|Summary of GPIO Connections]].
 +
 
 +
Further details can be found in CQ-TV 248 page 25 and on the DTX-1 support site. http://www.dtx1.info/index.html
 +
 
 +
The settings on the DTX-1 under the DTX1 ADVANCED MENU SETTINGS must match those set on the Portsdown otherwise corrupt digital signals will be transmitted.
 +
 
 +
Thanks to Martin G8LCE for this information

Latest revision as of 10:49, 18 October 2019

As of Software Version 201710081, the Portsdown software can be used to transmit MPEG-2 or H264 encoded pictures with a DTX-1. This experimental capability is NOT compatible with the use of WaveShare touchscreen and must be controlled from the Console or an Official Raspberry Pi 7" touchscreen (often referred to as a "7 inch Element 14 touchscreen"). If you select DTX-1 as the output mode with a Waveshare touchscreen connected, the touchscreen will become unusable as soon as you got to transmit, as some of the pins used for the screen are the same as those used for sending signals to the DTX-1.

Additionally, the hardware shutdown button, hardware shutdown button LED, keyed streaming, hardware keyed transmit, Attenuator and signal generator functions are inoperative due to GPIO pin conflicts.

A summary of the pin connections used is here Summary of GPIO Connections.

Further details can be found in CQ-TV 248 page 25 and on the DTX-1 support site. http://www.dtx1.info/index.html

The settings on the DTX-1 under the DTX1 ADVANCED MENU SETTINGS must match those set on the Portsdown otherwise corrupt digital signals will be transmitted.

Thanks to Martin G8LCE for this information