Difference between revisions of "Using ex-satellite dishes"

From BATC Wiki
Jump to navigation Jump to search
(→‎Feeds for dishes: Correct G4NNS link.)
 
Line 24: Line 24:
 
==Feeds for dishes==
 
==Feeds for dishes==
  
Excellent design for 3.4 and 5.6GHz by Brian G4NNS: http://myweb.tiscali.co.uk/g4nns/FeedHorn.html
+
Excellent design for 3.4 and 5.6GHz by Brian G4NNS: http://brcg4nns.org/FeedHorn.html
  
 
http://www.w1ghz.org/antbook/conf/dualband_feedhorn.pdf
 
http://www.w1ghz.org/antbook/conf/dualband_feedhorn.pdf

Latest revision as of 12:59, 19 November 2019

Your local household waste disposal area (tip) is a great source of parabolic dishes which are very usable on the microwave amateur bands - and it's environmentally friendly to re-cycle them!

The picture shows a recycled Sky mini dish being used on 5.6GHz - the feed is a WA5VJB log-periodic PCB feed http://www.wa5vjb.com/products1.html – these are available in the UK from G4DDK. http://www.g4ddk.com/Prices.html (see the 5.6Ghz wiki page for more details)

56 dish feed.JPG


Finding the feed point

The easiest way to find the feed point is just carefully replace the LNB with the feed or replacement LNB in exactly the same position. However this is not always possible - but luckily there are a great number of pages on the web showing how to find the point:

Online calculator to find the feed point of an offset dish: http://www.satsig.net/pointing/finding-dish-offset-angle.htm

Excellent article by Paul Wade W1GHZ on using offset dishes http://www.w1ghz.org/antbook/chap5.pdf

http://www.satsig.net/22-deg-offset-dish.htm

http://www.john-legon.co.uk/offsetdish.htm

http://www.ntms.org/files/Nov2015/Fun_with_Off-set_dish.pdf

This page has a calculator for parabolic dishes (not many of those at your local tip): http://www.qsl.net/pa2ohh/jsparabolic.htm

Feeds for dishes

Excellent design for 3.4 and 5.6GHz by Brian G4NNS: http://brcg4nns.org/FeedHorn.html

http://www.w1ghz.org/antbook/conf/dualband_feedhorn.pdf

http://www.w1ghz.org/10g/dualhorn.htm

10GHz feed horn for Sky Dish made using standard UK copper plumbing bits: http://www.g3pho.free-online.co.uk/microwaves/horn.htm