Difference between revisions of "Repeater system basic IR configuration"
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
# Input config | # Input config | ||
# Recommended gpio pins for "input active" are 32, 35, 18, 22, 16, 19 and 21 | # Recommended gpio pins for "input active" are 32, 35, 18, 22, 16, 19 and 21 | ||
| − | + | ||
# announcemediatype determines the player used | # announcemediatype determines the player used | ||
| − | + | ||
# Switcher can use "ir" or "gpio" or "i2c" | # Switcher can use "ir" or "gpio" or "i2c" | ||
# IR uses a TX on GPIO pin 12 | # IR uses a TX on GPIO pin 12 | ||
| Line 27: | Line 27: | ||
# activeinputhold (yes/no) means that lower priority inputs do not get replaced by higher priority (except pri 1) | # activeinputhold (yes/no) means that lower priority inputs do not get replaced by higher priority (except pri 1) | ||
# Show Quad is yes/no and overides activeinputhold | # Show Quad is yes/no and overides activeinputhold | ||
| − | + | ||
# Number of available inputs does not include the controller, so is max 3 for a 4-input switch | # Number of available inputs does not include the controller, so is max 3 for a 4-input switch | ||
availableinputs=3 | availableinputs=3 | ||
| Line 34: | Line 34: | ||
showquadformultipleinputs=yes | showquadformultipleinputs=yes | ||
cascadedswitches=no | cascadedswitches=no | ||
| − | + | ||
outputswitchcontrol=ir | outputswitchcontrol=ir | ||
showoutputongpio=yes | showoutputongpio=yes | ||
| Line 41: | Line 41: | ||
outputi2caddress=3 | outputi2caddress=3 | ||
outputi2cquadchannel=9 | outputi2cquadchannel=9 | ||
| − | + | ||
input0name=Controller | input0name=Controller | ||
output0code=nec:0x17 | output0code=nec:0x17 | ||
| Line 47: | Line 47: | ||
output0i2cchannel=1 | output0i2cchannel=1 | ||
output0audioi2cbit=0 | output0audioi2cbit=0 | ||
| − | + | ||
| − | + | input1name=70cms Ryde | |
| − | + | input1prioritylevel=1 | |
| − | input1name= | + | input1activegpiopin=32 |
| − | input1prioritylevel=1 | + | output1code=nec:0x12 |
| − | input1activegpiopin=32 | + | output1hdmiswitchpin=37 |
| − | output1code=nec:0x12 | + | output1i2cchannel=2 |
| − | output1hdmiswitchpin=37 | + | output1audioi2cbit=1 |
| − | output1i2cchannel=2 | + | input1announcemediatype=jpg |
| − | output1audioi2cbit=1 | + | input1announcemediafile=/home/pi/tmp/input1.jpg |
| − | input1announcemediatype=jpg | + | input1announcemediaduration=3 |
| − | input1announcemediafile=/home/pi/tmp/input1.jpg | + | |
| − | input1announcemediaduration=3 | + | input2name=23cms Ryde |
| − | + | input2prioritylevel=2 | |
| − | input2name= | + | input2activegpiopin=35 |
| − | input2prioritylevel=2 | + | output2code=nec:0x59 |
| − | input2activegpiopin=35 | + | output2hdmiswitchpin=38 |
| − | output2code=nec:0x59 | + | output2i2cchannel=3 |
| − | output2hdmiswitchpin=38 | + | output2audioi2cbit=2 |
| − | output2i2cchannel=3 | + | input2announcemediatype=jpg |
| − | output2audioi2cbit=2 | + | input2announcemediafile=/home/pi/tmp/input2.jpg |
| − | input2announcemediatype=jpg | + | input2announcemediaduration=3 |
| − | input2announcemediafile=/home/pi/tmp/input2.jpg | + | |
| − | input2announcemediaduration=3 | + | input3name=Stream rxr |
| − | + | input3prioritylevel=3 | |
| − | input3name= | + | input3activegpiopin=18 |
| − | input3prioritylevel=3 | + | output3code=nec:0x08 |
| − | input3activegpiopin=18 | + | output3hdmiswitchpin=33 |
| − | output3code=nec:0x08 | + | output3i2cchannel=4 |
| − | output3hdmiswitchpin=33 | + | output3audioi2cbit=3 |
| − | output3i2cchannel=4 | + | input3announcemediatype=jpg |
| − | output3audioi2cbit=3 | + | input3announcemediafile=/home/pi/tmp/input3.jpg |
| − | input3announcemediatype=jpg | + | input3announcemediaduration=3 |
| − | input3announcemediafile=/home/pi/tmp/input3.jpg | ||
| − | input3announcemediaduration=3 | ||
Revision as of 11:41, 22 February 2022
The section of the config file for basic IR configuration is shown here for an HDMI switch with the following control codes:
| Function | IR Code |
|---|---|
| Input 1 | 0x17 |
| Input 2 | 0x12 |
| Input3 | 0x59 |
| Input 4 | 0x08 |
| Quad | 0x18 |
# Input config # Recommended gpio pins for "input active" are 32, 35, 18, 22, 16, 19 and 21 # announcemediatype determines the player used # Switcher can use "ir" or "gpio" or "i2c" # IR uses a TX on GPIO pin 12 # GPIO uses pins 36, 37, 38, 33, 31, 29, 23, 24. Can be enabled with ir or i2c # i2c uses FMS6501A on Output channel 1 # activeinputhold (yes/no) means that lower priority inputs do not get replaced by higher priority (except pri 1) # Show Quad is yes/no and overides activeinputhold # Number of available inputs does not include the controller, so is max 3 for a 4-input switch availableinputs=3 activeinputhold=no # Set next parameter to no if you do not want (or do not have) a quad display showquadformultipleinputs=yes cascadedswitches=no outputswitchcontrol=ir showoutputongpio=yes outputhdmiresetcode=nec:0x17 outputhdmiquadcode=nec:0x18 outputi2caddress=3 outputi2cquadchannel=9 input0name=Controller output0code=nec:0x17 output0hdmiswitchpin=36 output0i2cchannel=1 output0audioi2cbit=0 input1name=70cms Ryde input1prioritylevel=1 input1activegpiopin=32 output1code=nec:0x12 output1hdmiswitchpin=37 output1i2cchannel=2 output1audioi2cbit=1 input1announcemediatype=jpg input1announcemediafile=/home/pi/tmp/input1.jpg input1announcemediaduration=3 input2name=23cms Ryde input2prioritylevel=2 input2activegpiopin=35 output2code=nec:0x59 output2hdmiswitchpin=38 output2i2cchannel=3 output2audioi2cbit=2 input2announcemediatype=jpg input2announcemediafile=/home/pi/tmp/input2.jpg input2announcemediaduration=3 input3name=Stream rxr input3prioritylevel=3 input3activegpiopin=18 output3code=nec:0x08 output3hdmiswitchpin=33 output3i2cchannel=4 output3audioi2cbit=3 input3announcemediatype=jpg input3announcemediafile=/home/pi/tmp/input3.jpg input3announcemediaduration=3