Jetson Nano

From BATC Wiki
Revision as of 21:41, 15 May 2019 by G8GKQ (talk | contribs) (Created page with "This page is a starting point for resources for using the Jetson Nano to drive a LimeSDR to transmit DATV. ===G8GKQ's Installation Procedure=== To start with, you need a Jet...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This page is a starting point for resources for using the Jetson Nano to drive a LimeSDR to transmit DATV.

G8GKQ's Installation Procedure

To start with, you need a Jetson Nano, a 32 GB SD Card (Sandisk Ultra 10 recommended), a 4A 5V PSU with a 2.1mm power plug, a 0.1 inch jumper, an HDMI monitor, a USB Mouse and a USB keyboard.

Download the Jetson Nano disk image to a PC and unzip it. Use Win32 Disk Imager or Etcher to write it to your SD Card.

Fit the jumper link to the Nano PCB to select the use of the 2.1mm power socket, insert the SD Card, connect the monitor, keyboard and mouse. Connect the Nano to your home network and then connect the power and turn it on. Go through the NVIDIA start up routine so that you have a working Nano connected to your network.

Right-click on the desktop and open a terminal window.

Retrieved from ‘https://wiki.batc.org.uk/index.php?title=Jetson_Nano&oldid=5783’