Difference between revisions of "Portsdown Video Sources"

From BATC Wiki
Jump to navigation Jump to search
(Created page with "The video encoders on the Portsdown transmitter need specific configuiration for each video device. Information about some of these devices has been collated on this page. =...")
 
Line 1: Line 1:
The video encoders on the Portsdown transmitter need specific configuiration for each video device.  Information about some of these devices has been collated on this page.
+
The video encoders on the Portsdown transmitter need specific configuiration for each video device.  Information about some of these devices has been collated on this page.  The exact model of device can be found by using the Linux command lsusb and checking the manufacturer and device IDs - each are 4-digit hex numbers.
 +
 
 +
The information needed to configure the cameras for the Portsdown can be gleaned from the following commands:
 +
v4l2-ctl --list-devices
 +
v4l2-ctl -d /dev/video1 --list-formats-ext
 +
arecord -l
 +
arecord -f S16_LE -r 60000 -D -c 2 hw:1,0 -d 5 testS16_LE.wav
 +
Then trial and error is required to fine-tune the response.
  
 
===WebCams===
 
===WebCams===
  
 
====Logitech C920 - Old Version====
 
====Logitech C920 - Old Version====
 +
 +
Response to lsusb:
 +
ID 046d:082d Logitech, Inc. HD Pro Webcam C920
 +
 +
This version of the C920 includes a very capable hardware H264 encoder, which is not included in the newer version.  This camera is supported by both the Portsdown 2020 and the Portsdown 4.  The responses to the commands above are listed here:
 +
 +
  
  

Revision as of 16:37, 22 August 2020

The video encoders on the Portsdown transmitter need specific configuiration for each video device. Information about some of these devices has been collated on this page. The exact model of device can be found by using the Linux command lsusb and checking the manufacturer and device IDs - each are 4-digit hex numbers.

The information needed to configure the cameras for the Portsdown can be gleaned from the following commands:

v4l2-ctl --list-devices
v4l2-ctl -d /dev/video1 --list-formats-ext
arecord -l
arecord -f S16_LE -r 60000 -D -c 2 hw:1,0 -d 5 testS16_LE.wav

Then trial and error is required to fine-tune the response.

WebCams

Logitech C920 - Old Version

Response to lsusb:

ID 046d:082d Logitech, Inc. HD Pro Webcam C920

This version of the C920 includes a very capable hardware H264 encoder, which is not included in the newer version. This camera is supported by both the Portsdown 2020 and the Portsdown 4. The responses to the commands above are listed here:



Logitech C920 - New Version

Logitech C910

Logitech B910