Streaming to batc.tv with Raspberry Pi

From BATC Wiki
Revision as of 12:20, 5 August 2017 by G8GKQ (talk | contribs)
Jump to navigation Jump to search

With a software release in early August 2017 the Portsdown can stream directly to batc.tv from the composite video input on the Eazycap dongle, enabling it to be used as a low power consumption streaming appliance at repeater sites.

You do not need a Touchscreen to operate in streaming mode but you will need to enter your stream name via the console menu. Note all other parameters are pre-set to H264 encoding at 576Kbit/s without audio or 512Kbit/s with 2 channels of audio.

To enter your stream name, log in to console mode as normal and select output mode from the main menu:


Screen2.jpg

Select 3: Output mode


Screen3.jpg

Select: BATC


Screen4.jpg

Enter the "stream" listed on your BATC account page below the FMS URL:

Stream.JPG