Difference between revisions of "Winter Hill receiver project"

From BATC Wiki
Jump to navigation Jump to search
(Replaced content with "See WinterHill_Receiver_Project")
Tag: Replaced
 
(49 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Winter Hill==
+
See [[WinterHill_Receiver_Project]]
 
 
The Winter Hill receiver project by Brian G4EWJ uses the BATC [[Advanced receiver hardware]].
 
 
 
The software will run on the Raspberry Pi4 desktop environment providing a multi-channel receiver capable of receiving up to four channels simultaneously.
 
 
 
== Timeline==
 
 
 
December 2020 - Currently the project is at the design phase with a proof of concept receiver working on breadboard hardware.
 
 
 
February 2021 - beta testing in progress
 
 
 
March 2021 - First PCBs expected
 
 
 
 
 
==Hardware==
 
 
 
 
 
The PCB design by Mike G0MJW is based on a completely new concept, BATC Advanced DATV Receiver, supporting two SERIT tuners with an integrated Raspberry PI4 and PICs. No USB module is required. This supports 4 simultaneous receivers in either a set top box mode, with the PI desktop, or headless, or a combination of these.
 
 
 
 
====Version 0.1====
 
 
 
Feasibility design which was worked fine
 
 
 
====Version 0.2====
 
 
 
A prototype that was also built.
 
 
 
====Version 1====
 
 
 
First general release PCB - limited availability in January 2021.  General release March 2021
 
 
 
 
 
 
 
Schematic is here:
 
 
 
BOM is here:
 
 
 
 
 
 
 
==Software==
 
 
 
TBD
 
 
 
===Hardware Build===
 

Latest revision as of 13:00, 17 March 2021