Difference between revisions of "The Effect of FEC"

From BATC Wiki
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 3: Line 3:
 
The fraction (for example 2/3) defines how much of the data capacity is available for headers, audio and video.  The remainder is used for error correction.
 
The fraction (for example 2/3) defines how much of the data capacity is available for headers, audio and video.  The remainder is used for error correction.
  
−
The typical signal to noise required for decoding in each mode and FEC are listed below, together with indicative header+audio+video (payload) data rates for 1000 kS.  Note that DVB-S2 has a smaller header so is more efficient in that it allows for more audio and video in the payload for the same symbol rate.  It also needs slightly less SNR to decode, because it is easier for the receiver to lock to the more advanced waveform.
+
The typical signal to noise required for decoding in each mode and FEC are listed below, together with indicative header+audio+video (payload) data rates for 1000 kS.  Note that DVB-S2 has a smaller header so is more efficient in that it allows for more audio and video in the payload for the same symbol rate.  It also needs slightly less SNR to decode, because it is easier for the receiver to lock to the more advanced FEC method.
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 9: Line 9:
 
! Standard !! Modulation !! FEC !! SNR Required !! Payload Bitrate Available
 
! Standard !! Modulation !! FEC !! SNR Required !! Payload Bitrate Available
 
|-
 
|-
−
| DVB-S || QPSK || 1/2 || 1.7 dB || 1000 kS
+
| DVB-S || QPSK || 1/2 || 1.7 dB || 1000 kbits/s
 
|-
 
|-
−
| DVB-S || QPSK || 2/3 || 3.3 dB || 1333 kS
+
| DVB-S || QPSK || 2/3 || 3.3 dB || 1333 kbits/s
 
|-
 
|-
−
| DVB-S || QPSK || 3/4 || 4.2 dB || 1500 kS
+
| DVB-S || QPSK || 3/4 || 4.2 dB || 1500 kbits/s
 
|-
 
|-
−
| DVB-S || QPSK || 5/6 || 5.1 dB || 1666 kS
+
| DVB-S || QPSK || 5/6 || 5.1 dB || 1666 kbits/s
 
|-
 
|-
−
| DVB-S || QPSK || 7/8 || 5.8 dB || 1750 kS
+
| DVB-S || QPSK || 7/8 || 5.8 dB || 1750 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 1/4 || -2.3 dB || 500 kS
+
| DVB-S2 || QPSK || 1/4 || -2.3 dB || 500 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 1/3 || -1.2 dB || 666 kS
+
| DVB-S2 || QPSK || 1/3 || -1.2 dB || 666 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 2/5 || -0.3 dB || 800 kS
+
| DVB-S2 || QPSK || 2/5 || -0.3 dB || 800 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 1/2 || 1.0 dB || 1000 kS
+
| DVB-S2 || QPSK || 1/2 || 1.0 dB || 1000 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 3/5 || 2.3 dB || 1200 kS
+
| DVB-S2 || QPSK || 3/5 || 2.3 dB || 1200 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 2/3 || 3.1 dB || 1333 kS
+
| DVB-S2 || QPSK || 2/3 || 3.1 dB || 1333 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 3/4 || 4.1 dB || 1500 kS
+
| DVB-S2 || QPSK || 3/4 || 4.1 dB || 1500 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 4/5 || 4.7 dB || 1600 kS
+
| DVB-S2 || QPSK || 4/5 || 4.7 dB || 1600 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 5/6 || 5.2 dB || 1666 kS
+
| DVB-S2 || QPSK || 5/6 || 5.2 dB || 1666 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK || 8/9 || 6.2 dB || 1778 kS
+
| DVB-S2 || QPSK || 8/9 || 6.2 dB || 1778 kbits/s
 
|-
 
|-
−
| DVB-S2 || QPSK|| 9/10 || 6.5 dB || 1800 kS
+
| DVB-S2 || QPSK|| 9/10 || 6.5 dB || 1800 kbits/s
 
|-
 
|-
−
| DVB-S2 || 8PSK || 3/5 || 5.5 dB || 1800 kS
+
| DVB-S2 || 8PSK || 3/5 || 5.5 dB || 1800 kbits/s
 
|-
 
|-
−
| DVB-S2 || 8PSK || 2/3 || 6.6 dB || 2000 kS
+
| DVB-S2 || 8PSK || 2/3 || 6.6 dB || 2000 kbits/s
 
|-
 
|-
−
| DVB-S2 || 8PSK || 3/4 || 7.9 dB || 2250 kS
+
| DVB-S2 || 8PSK || 3/4 || 7.9 dB || 2250 kbits/s
 
|-
 
|-
−
| DVB-S2 || 8PSK || 5/6 || 9.4 dB || 2500 kS
+
| DVB-S2 || 8PSK || 5/6 || 9.4 dB || 2500 kbits/s
 
|-
 
|-
−
| DVB-S2 || 8PSK || 8/9 || 10.7 dB || 2667 kS
+
| DVB-S2 || 8PSK || 8/9 || 10.7 dB || 2667 kbits/s
 
|-
 
|-
−
| DVB-S2 || 8PSK || 9/10 || 11.0 dB || 2700 kS
+
| DVB-S2 || 8PSK || 9/10 || 11.0 dB || 2700 kbits/s
 
|-
 
|-
−
| DVB-S2 || 16APSK || 2/3 || 9.0 dB || 2667 kS
+
| DVB-S2 || 16APSK || 2/3 || 9.0 dB || 2667 kbits/s
 
|-
 
|-
−
| DVB-S2 || 16APSK || 3/4 || 10.2 dB || 3000 kS
+
| DVB-S2 || 16APSK || 3/4 || 10.2 dB || 3000 kbits/s
 
|-
 
|-
−
| DVB-S2 || 16APSK || 4/5 || 11.0 dB || 3200 kS
+
| DVB-S2 || 16APSK || 4/5 || 11.0 dB || 3200 kbits/s
 
|-
 
|-
−
| DVB-S2 || 16APSK || 5/6 || 11.6 dB || 3333 kS
+
| DVB-S2 || 16APSK || 5/6 || 11.6 dB || 3333 kbits/s
 
|-
 
|-
−
| DVB-S2 || 16APSK || 8/9 || 12.9 dB || 3556 kS
+
| DVB-S2 || 16APSK || 8/9 || 12.9 dB || 3556 kbits/s
 
|-
 
|-
−
| DVB-S2 || 16APSK || 9/10 || 13.2 dB || 3600 kS
+
| DVB-S2 || 16APSK || 9/10 || 13.2 dB || 3600 kbits/s
 
|-
 
|-
−
| DVB-S2 || 32APSK || 3/4 || 12.8 dB || 3750 kS
+
| DVB-S2 || 32APSK || 3/4 || 12.8 dB || 3750 kbits/s
 
|-
 
|-
−
| DVB-S2 || 32APSK || 4/5 || 13.7 dB || 4000 kS
+
| DVB-S2 || 32APSK || 4/5 || 13.7 dB || 4000 kbits/s
 
|-
 
|-
−
| DVB-S2 || 32APSK || 5/6 || 14.3 dB || 4167 kS
+
| DVB-S2 || 32APSK || 5/6 || 14.3 dB || 4167 kbits/s
 
|-
 
|-
−
| DVB-S2 || 32APSK || 8/9 || 15.7 dB || 4444 kS
+
| DVB-S2 || 32APSK || 8/9 || 15.7 dB || 4444 kbits/s
 
|-
 
|-
−
| DVB-S2 || 32APSK || 9/10 || 16.1 dB || 4500 kS
+
| DVB-S2 || 32APSK || 9/10 || 16.1 dB || 4500 kbits/s
 
|}
 
|}

Latest revision as of 15:05, 8 July 2021

DVB-S and DVB-S2 transmitters allow the selection of different values of Forward Error Correction. Put simply, forward error correction steals data capacity that would otherwise be used for video and audio, and uses it to correct errors to allow weaker signals to be decoded.

The fraction (for example 2/3) defines how much of the data capacity is available for headers, audio and video. The remainder is used for error correction.

The typical signal to noise required for decoding in each mode and FEC are listed below, together with indicative header+audio+video (payload) data rates for 1000 kS. Note that DVB-S2 has a smaller header so is more efficient in that it allows for more audio and video in the payload for the same symbol rate. It also needs slightly less SNR to decode, because it is easier for the receiver to lock to the more advanced FEC method.

Standard Modulation FEC SNR Required Payload Bitrate Available
DVB-S QPSK 1/2 1.7 dB 1000 kbits/s
DVB-S QPSK 2/3 3.3 dB 1333 kbits/s
DVB-S QPSK 3/4 4.2 dB 1500 kbits/s
DVB-S QPSK 5/6 5.1 dB 1666 kbits/s
DVB-S QPSK 7/8 5.8 dB 1750 kbits/s
DVB-S2 QPSK 1/4 -2.3 dB 500 kbits/s
DVB-S2 QPSK 1/3 -1.2 dB 666 kbits/s
DVB-S2 QPSK 2/5 -0.3 dB 800 kbits/s
DVB-S2 QPSK 1/2 1.0 dB 1000 kbits/s
DVB-S2 QPSK 3/5 2.3 dB 1200 kbits/s
DVB-S2 QPSK 2/3 3.1 dB 1333 kbits/s
DVB-S2 QPSK 3/4 4.1 dB 1500 kbits/s
DVB-S2 QPSK 4/5 4.7 dB 1600 kbits/s
DVB-S2 QPSK 5/6 5.2 dB 1666 kbits/s
DVB-S2 QPSK 8/9 6.2 dB 1778 kbits/s
DVB-S2 QPSK 9/10 6.5 dB 1800 kbits/s
DVB-S2 8PSK 3/5 5.5 dB 1800 kbits/s
DVB-S2 8PSK 2/3 6.6 dB 2000 kbits/s
DVB-S2 8PSK 3/4 7.9 dB 2250 kbits/s
DVB-S2 8PSK 5/6 9.4 dB 2500 kbits/s
DVB-S2 8PSK 8/9 10.7 dB 2667 kbits/s
DVB-S2 8PSK 9/10 11.0 dB 2700 kbits/s
DVB-S2 16APSK 2/3 9.0 dB 2667 kbits/s
DVB-S2 16APSK 3/4 10.2 dB 3000 kbits/s
DVB-S2 16APSK 4/5 11.0 dB 3200 kbits/s
DVB-S2 16APSK 5/6 11.6 dB 3333 kbits/s
DVB-S2 16APSK 8/9 12.9 dB 3556 kbits/s
DVB-S2 16APSK 9/10 13.2 dB 3600 kbits/s
DVB-S2 32APSK 3/4 12.8 dB 3750 kbits/s
DVB-S2 32APSK 4/5 13.7 dB 4000 kbits/s
DVB-S2 32APSK 5/6 14.3 dB 4167 kbits/s
DVB-S2 32APSK 8/9 15.7 dB 4444 kbits/s
DVB-S2 32APSK 9/10 16.1 dB 4500 kbits/s
Retrieved from ‘https://wiki.batc.org.uk/index.php?title=The_Effect_of_FEC&oldid=8632’