White Rocket LNB Lens Adaptor for POTY Feed: Difference between revisions
Jump to navigation
Jump to search
Created page with "== 3D Printed by Phil Crump M0DNY == 300px This is designed to mount a "White Rocket" LNB Lens on the front of a POTY feed. Suggested printing is: * Material: PETG * Layer Height: 0.15mm * Infill: 50% (doesn't matter much) The STL can be downloaded here: [https://wiki.batc.org.uk/images/5/56/PhilM0DNY_lnbdaptor_v5.stl PhilM0DNY_lnbdaptor_v5.stl]" |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 3: | Line 3: | ||
[[File:Adaptor v5 SlicerImage.png|300px]] | [[File:Adaptor v5 SlicerImage.png|300px]] | ||
This is designed to mount a "White Rocket" LNB Lens on the front of a POTY feed. | This is designed to mount a "White Rocket" LNB Lens on the 22mm copper pipe on the front of a POTY feed. | ||
Suggested printing is: | Suggested printing is: | ||
| Line 11: | Line 11: | ||
The STL can be downloaded here: [https://wiki.batc.org.uk/images/5/56/PhilM0DNY_lnbdaptor_v5.stl PhilM0DNY_lnbdaptor_v5.stl] | The STL can be downloaded here: [https://wiki.batc.org.uk/images/5/56/PhilM0DNY_lnbdaptor_v5.stl PhilM0DNY_lnbdaptor_v5.stl] | ||
The FreeCAD design file can be downloaded here: [https://wiki.batc.org.uk/images/f/fe/PhilM0DNY_LNBAdaptor_v5.FCStd PhilM0DNY_LNBAdaptor_v5.FCStd] | |||
Latest revision as of 11:42, 9 November 2026
3D Printed by Phil Crump M0DNY
This is designed to mount a "White Rocket" LNB Lens on the 22mm copper pipe on the front of a POTY feed.
Suggested printing is:
- Material: PETG
- Layer Height: 0.15mm
- Infill: 50% (doesn't matter much)
The STL can be downloaded here: PhilM0DNY_lnbdaptor_v5.stl
The FreeCAD design file can be downloaded here: PhilM0DNY_LNBAdaptor_v5.FCStd