Analog Video Output

From BATC Wiki
Revision as of 07:29, 22 September 2017 by M0YDH (talk | contribs) (Refer to 5.6GHz FPV transmitter)
Jump to navigation Jump to search

Software update 201707120 introduces an Analog PAL Video Output mode. In update 201707311 audio routing from the USB microphone to the RPi audio output was added. This mode is particularly useful for driving analog video transmitters when operating portable without the need for an additional camera, test card generator or microphone. This is especially true for the 5.6GHz FPV transmitter shown elsewhere on the Wiki.

The Composite video output mode can be selected from the "Output" menu on the console, or from Menu 2 on the touchscreen.

Note that the video on the analog output is smooth, not jerky like the viewfinder which is limited to a slow refresh rate.

Rather than reproduce the connection details, here is a link to a good website describing the pin connections on the 4-terminal 3.5mm jack. http://www.instructables.com/id/Raspberry-Pi-2-Quick-n-Easy-RCA/ It should be noted that there is no standard connection for this jack - do not assume that the lead you have in the junk box will be correct!

Retrieved from ‘https://wiki.batc.org.uk/index.php?title=Analog_Video_Output&oldid=3110’