Difference between revisions of "Portsdown - where do I begin?"
(Created page with "Hopefully you've reached this page because you've read the system overview and want to know more - if not, we suggest you do spend 5 minutes read...") |
|||
| Line 5: | Line 5: | ||
Once you've read the Hardware overview, you can see there's not much to it! So here's the shopping list: | Once you've read the Hardware overview, you can see there's not much to it! So here's the shopping list: | ||
| − | + | ===Shopping list=== | |
| − | + | ====Raspberry Pi==== | |
| + | |||
| + | Ideally you will buy a version 3, but if you have a version 2 or even a Model B lying in the cupboard, give it a try. Because, believe it or not, that's all you need to send pictures across the shack! But to do this you will have to read another section of the user manual and follow some instructions! | ||
| + | |||
| + | So go and have a look at the [[Initial setup|initial set up guide]] - follow those instructions and using QPSKRF Ugly mode, you will be able to send pictures across the shack but you really need to read this section on Ugly mode as there's several things it cannot do. | ||
However, if you do not want to always have a computer connected, you'll need to buy the touchscreen. | However, if you do not want to always have a computer connected, you'll need to buy the touchscreen. | ||
| − | + | ====Longwave....==== | |
| + | |||
| + | Once you've bought the screen, you'll need to read [[Initial setup|initial set up]] again to learn how to configure it and make the Rpi boot straight to it so you never have to use the PC again. | ||
| + | |||
| + | By now, you're probably bored of the test sequences and bouncing balls so you want to add a camera input. You can have 2 types of camera: | ||
| + | |||
| + | ====The Raspberry camera==== | ||
| + | This produces very high quality images but is just the camera. | ||
| + | |||
| + | ====An Easycap USB dongle==== | ||
| + | This has a yellow video phono connector on it and will enable you to connect you mixing desk, old camcorder or even your old VHS tape machine! | ||
| + | |||
| + | Guess what, once you've bought the camera or USB dongle, you'll need to read [[Initial setup|initial set up]] again to learn how to configure them and send live pictures from your Raspberry Pi. | ||
| + | |||
| + | ====Modulator Filter PCB==== | ||
| + | So up until now, you've been sending pictures across the shack using Ugly mode (Serious note - Please don't connect it to an aerial unless you want a visit from Ofcom!). | ||
| + | |||
| + | Right now, that's all you can do because the modulator / filter board is not quite ready. Once it is (and you'll be able to buy it from the BATC shop) this will enable you to get on air properly | ||
Revision as of 17:14, 7 January 2017
Hopefully you've reached this page because you've read the system overview and want to know more - if not, we suggest you do spend 5 minutes reading the system overview.
OK - now you've read that, you want to get started! The next thing is really to read the hardware overview - sorry but there's load of useful information in there, such as where to buy the various bits that you need to send pictures across the shack.
Once you've read the Hardware overview, you can see there's not much to it! So here's the shopping list:
Shopping list
Raspberry Pi
Ideally you will buy a version 3, but if you have a version 2 or even a Model B lying in the cupboard, give it a try. Because, believe it or not, that's all you need to send pictures across the shack! But to do this you will have to read another section of the user manual and follow some instructions!
So go and have a look at the initial set up guide - follow those instructions and using QPSKRF Ugly mode, you will be able to send pictures across the shack but you really need to read this section on Ugly mode as there's several things it cannot do.
However, if you do not want to always have a computer connected, you'll need to buy the touchscreen.
Longwave....
Once you've bought the screen, you'll need to read initial set up again to learn how to configure it and make the Rpi boot straight to it so you never have to use the PC again.
By now, you're probably bored of the test sequences and bouncing balls so you want to add a camera input. You can have 2 types of camera:
The Raspberry camera
This produces very high quality images but is just the camera.
An Easycap USB dongle
This has a yellow video phono connector on it and will enable you to connect you mixing desk, old camcorder or even your old VHS tape machine!
Guess what, once you've bought the camera or USB dongle, you'll need to read initial set up again to learn how to configure them and send live pictures from your Raspberry Pi.
Modulator Filter PCB
So up until now, you've been sending pictures across the shack using Ugly mode (Serious note - Please don't connect it to an aerial unless you want a visit from Ofcom!).
Right now, that's all you can do because the modulator / filter board is not quite ready. Once it is (and you'll be able to buy it from the BATC shop) this will enable you to get on air properly