Difference between revisions of "Recording the BATC streamer"

From BATC Wiki
Jump to navigation Jump to search
(Created page with "Yopu can record a BATC streamer channel on your local PC using ffmpeg. First you need to install ffmpeg - details elsewhere on this forum. The basic command is: ffmpeg -i...")
 
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
Yopu can record a BATC streamer channel on your local PC using ffmpeg.
+
You can record a BATC streamer channel on your local PC using ffmpeg.
  
 
First you need to install ffmpeg - details elsewhere on this forum.
 
First you need to install ffmpeg - details elsewhere on this forum.
Line 5: Line 5:
 
The basic command is:
 
The basic command is:
  
  ffmpeg -i rtmp://batc.org.uk/live/<streamurl> -c:v copy -c:a copy -f mp4 recording.mp4
+
  ffmpeg -i rtmp://batc.org.uk/live/<streamname> -c:v copy -c:a copy -f mp4 recording.mp4
  
You can also record on a Portsdown using the command:
+
You can also record on a Portsdown.  ffmpeg is already installed, so you just need to use the command:
  
  rpidatv/bin/ffmpeg  -itsoffset 00:00:1.0 -i rtmp://batc.org.uk/live/NARC -c:v copy -c:a copy -f mp4 recording.mp4
+
  rpidatv/bin/ffmpeg  -itsoffset 00:00:1.0 -i rtmp://batc.org.uk/live/<streamname> -c:v copy -c:a copy -f mp4 recording.mp4
  
Note - adjust the itsoffset number (final digits are seconds) for best lipsync.
+
You will find "recording.mp4" in the directory that you called the command from.  Note - adjust the itsoffset number (final digits are seconds) for best lipsync.  The value above seems to work perfectly on a Raspberry Pi 3.
 +
 
 +
On a Raspberry Pi 4 the following (long) command line was required.  Note that the streamname is entered twice, once for the audio on stream 0 which is delayed by itsoffset (1.5 seconds) and again for the non-delayed video from stream 1.  itsoffset can be adjusted as required.
 +
 
 +
rpidatv/bin/ffmpeg -i rtmp://batc.org.uk/live/<streamname>  -itsoffset 00:00:1.5 -i rtmp://batc.org.uk/live/<streamname> -map 1:v -map 0:a -c:v copy -c:a copy -f mp4 recording.mp4
 +
 
 +
If you are doing an important recording, test with exactly the same configuration (streaming kit and recorder) beforehand and adjust the settings to get them right.

Latest revision as of 20:39, 21 November 2020

You can record a BATC streamer channel on your local PC using ffmpeg.

First you need to install ffmpeg - details elsewhere on this forum.

The basic command is:

ffmpeg -i rtmp://batc.org.uk/live/<streamname> -c:v copy -c:a copy -f mp4 recording.mp4

You can also record on a Portsdown. ffmpeg is already installed, so you just need to use the command:

rpidatv/bin/ffmpeg  -itsoffset 00:00:1.0 -i rtmp://batc.org.uk/live/<streamname> -c:v copy -c:a copy -f mp4 recording.mp4

You will find "recording.mp4" in the directory that you called the command from. Note - adjust the itsoffset number (final digits are seconds) for best lipsync. The value above seems to work perfectly on a Raspberry Pi 3.

On a Raspberry Pi 4 the following (long) command line was required. Note that the streamname is entered twice, once for the audio on stream 0 which is delayed by itsoffset (1.5 seconds) and again for the non-delayed video from stream 1. itsoffset can be adjusted as required.

rpidatv/bin/ffmpeg -i rtmp://batc.org.uk/live/<streamname>  -itsoffset 00:00:1.5 -i rtmp://batc.org.uk/live/<streamname> -map 1:v -map 0:a -c:v copy -c:a copy -f mp4 recording.mp4

If you are doing an important recording, test with exactly the same configuration (streaming kit and recorder) beforehand and adjust the settings to get them right.