Software Capability Matrix
There are 77 major modes that can be selected from the Portsdown Console Menu. This table is a guide to the modes that work, or are in various stages of development. An X means that the mode does not work or does not make sense. Please read with the notes below.
| . | Output | IQ | QPSKRF | BATC | STREAMER | DIGITHIN 29 | DATVEXPRESS | IP |
|---|---|---|---|---|---|---|---|---|
| Source | ||||||||
| CAMH264 | Working 1 | Working 2 | Working 3 | Working 4 | X | Working 5 | ? 6 | |
| CAMMPEG-2 | Working 7 | Working 8 | Working 3 | Working 4 | X | Working 9 | ? 6 | |
| FILETS | X | |||||||
| PATERNAUDIO | Working 10 | Working 11 | ? | ? | X | Working 12 | ? 6 | |
| CARRIER | Working 13 | ? 14 | X | X | X | Working 15 | X | |
| TESTMODE | Working 16 | X | X | X | X | X | X | |
| IPTSIN | Working 17 | ? 18 | ? | ? | X | ? | X | |
| ANALOGCAM | Working 19 | Working 20 | X 21 | X 21 | X | Working 22 | ? | |
| VNC | ? | ? | ? | ? | X | ? | ? | |
| DESKTOP | Working 23 | Working 24 | ? | ? | X | Working 25 | ? 6 | |
| CONTEST | Working 26 | Working 27 | ? | ? | X | Working 28 | ? 6 |
NOTES
1. CAMH264 transmits an H264 704 x 576 image from the RPi Camera at SRs from 125KS up to over 4MS with the Portsdown filter-modulator board. The image is also displayed on the touchscreen if the viewfinder is not turned off. No sound is transmitted.
2. QPSKRF uses software to generate a dirty H264 QPSK DVB-S RF signal on one of the GPIO pins with harmonics at up to 437 MHz. The maximum SR available is about 400KS. No sound is transmitted.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29. DigiThin mode has not been tested, but may well work. Please e-mail G8GKQ if you are prepared to test and use this mode - I can help!