Difference between revisions of "Streaming to batc.tv with Raspberry Pi"

From BATC Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
With a software release in early August 2017 the Portsdown can stream directly to batc.tv from the composite video input on the Eazycap dongle, enabling it to be used as a low power consumption streaming appliance at repeater sites.
 
With a software release in early August 2017 the Portsdown can stream directly to batc.tv from the composite video input on the Eazycap dongle, enabling it to be used as a low power consumption streaming appliance at repeater sites.
  
You do not need a Touchscreen to operate in streaming mode but you will need to enter your stream name via the console menu.  Note all other parameters are pre-set to H264 encoding at 576Kbit/s without audio and 52Kbit/s with 2 channels of audio.  
+
You do not need a Touchscreen to operate in streaming mode but you will need to enter your stream name via the console menu.  Note all other parameters are pre-set to H264 encoding at 576Kbit/s without audio and 512Kbit/s with 2 channels of audio.  
  
 
To enter your stream name, log in to console mode as normal and select output mode from the main menu:
 
To enter your stream name, log in to console mode as normal and select output mode from the main menu:

Revision as of 12:19, 5 August 2017

With a software release in early August 2017 the Portsdown can stream directly to batc.tv from the composite video input on the Eazycap dongle, enabling it to be used as a low power consumption streaming appliance at repeater sites.

You do not need a Touchscreen to operate in streaming mode but you will need to enter your stream name via the console menu. Note all other parameters are pre-set to H264 encoding at 576Kbit/s without audio and 512Kbit/s with 2 channels of audio.

To enter your stream name, log in to console mode as normal and select output mode from the main menu:


Screen2.jpg

Select 3: Output mode


Screen3.jpg

Select: BATC


Screen4.jpg

Enter the "stream" listed on your BATC account page below the FMS URL:

Stream.JPG