Difference between revisions of "Touchscreen mode"

From BATC Wiki
Jump to navigation Jump to search
Line 2: Line 2:
  
 
[[File:1-3 LCD Menu.jpg|400px]]
 
[[File:1-3 LCD Menu.jpg|400px]]
 +
 +
You can change the various parameters by simply touching on the screen - the chosen item will turn Green.
 +
 +
'''Before pressing it, note where the TX button is as you will need it later!'''
 +
 +
When ready to transmit press the TX button which will turn red - and the screen will then display the video source.
 +
 +
To go back to rx, press the touch screen in the area where the TX button was - the screen will return back to the control screen.

Revision as of 18:18, 3 January 2017

Providing you have selected the correct mode during initial set up the Portsdown transmitter will automatically boot up in to Touch screen mode with the following screen:

1-3 LCD Menu.jpg

You can change the various parameters by simply touching on the screen - the chosen item will turn Green.

Before pressing it, note where the TX button is as you will need it later!

When ready to transmit press the TX button which will turn red - and the screen will then display the video source.

To go back to rx, press the touch screen in the area where the TX button was - the screen will return back to the control screen.