Difference between revisions of "Encoder settings"

Latest revision as of 05:48, 28 May 2018

To stream to the new server you must first enter stream URL and name details in to your encoder - these details are different for every channel and can be found on your members account dashboard.

Details on setting up encoders include Adobe, Portsdown and Vmix can be found on this wiki page.

@@ Line 1: / Line 1: @@
-===Streaming from the Portsdown to the new Streamer===
+To stream to the new server you must first enter stream URL and name details in to your encoder - these details are different for every channel and can be found on your members account dashboard.
-The Portsdown is already set up to stream to the new streamer.  All you need to do is enter the Stream details and
+Details on setting up encoders include Adobe, Portsdown and Vmix [[Configuring_your_channel#Stream_input_URL|can be found on this wiki page.]]
-# Log on into Console mode and from the Menu select "3 Output"
-# In the Output Parameters Menu select "3 Output Mode"
-# In the Output Type menu use the down arrow to highlight "Streamer" and press the space bar and then enter.
-# The correct stream URL of  rtmp://rtmp.batc.org.uk/live should already be entered.
-# Press enter to bring up the stream key page
-# Enter your stream name (callsign) in lower case, followed by a hyphen and then the 6 character stream key.  For example g8gkq-xYzaBC
-# Press enter to get back to the main menu.
-Now, every time that you select "Streamer" either from the console menu or the touchscreen (or autostart into the streamer) you will stream to the new BATC Streamer.

Difference between revisions of "Encoder settings"

Latest revision as of 05:48, 28 May 2018

Navigation menu

Search