Difference between revisions of "Console mode"
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
If you do not have a touch screen connected use the IP Scanner program to find the IP address of your RPi. | If you do not have a touch screen connected use the IP Scanner program to find the IP address of your RPi. | ||
| − | *Open Putty and enter the IP address of your RPi and open a connection. At the logon prompt enter the default username of pi and the password | + | *Open Putty and enter the IP address of your RPi and open a connection. At the logon prompt enter the default username of pi and the password. The default password is raspberry - but you may have changed this. |
As the Portsdown transmitter is still in touchscreen mode, the putty window will be showing the keyboard commands - try pressing a button on the Touchscreen and you will see the command displayed. | As the Portsdown transmitter is still in touchscreen mode, the putty window will be showing the keyboard commands - try pressing a button on the Touchscreen and you will see the command displayed. | ||
| Line 30: | Line 30: | ||
==Menu options== | ==Menu options== | ||
| − | This page lists the menu options that are available as at Software Version | + | This page lists the menu options that are available as at Software Version 201710081. |
Main Menu | Main Menu | ||
| Line 46: | Line 46: | ||
Source Menu | Source Menu | ||
| − | + | │ ( ) CAMH264 Pi Camera, H264 Encoding │ | |
| − | + | │ ( ) CAMMPEG-2 Pi Camera, MPEG-2 Encoding (for old Sat RX) │ | |
| − | + | │ ( ) FILETS Play a Transport stream file (.ts) │ | |
| − | + | │ ( ) PATERNAUDIO JPEG Pictures From File (no audio) │ | |
| − | + | │ ( ) CARRIER Carrier with no Modulation │ | |
| − | + | │ ( ) TESTMODE Testmode for Carrier Null │ | |
| − | + | │ ( ) IPTSIN Transport stream from network │ | |
| − | + | │ ( ) ANALOGCAM Analog (EasyCap) Video Input │ | |
| − | + | │ ( ) VNC Show PC Desktop via VNC │ | |
| − | + | │ (*) DESKTOP Show Touchscreen or Raspberry Pi Display │ | |
| + | │ ( ) CONTEST Show Contest Numbers │ | ||
| + | │ ( ) ANALOGMPEG-2 MPEG-2 and sound from Comp Video Input │ | ||
| + | |||
Output Menu | Output Menu | ||
| Line 64: | Line 67: | ||
│ 4 PID PID setup │ | │ 4 PID PID setup │ | ||
│ 5 Frequency Output frequency(MHZ) │ | │ 5 Frequency Output frequency(MHZ) │ | ||
| + | │ 6 Caption Callsign Caption in MPEG-2 on/off │ | ||
FEC Menu | FEC Menu | ||
| Line 80: | Line 84: | ||
│ ( ) STREAMER Stream to other Streaming Facility │ | │ ( ) STREAMER Stream to other Streaming Facility │ | ||
│ ( ) DIGITHIN Use Digithin Modulator Card │ | │ ( ) DIGITHIN Use Digithin Modulator Card │ | ||
| + | │ ( ) DTX1 Use DTX1 TS Extender Card │ | ||
│ ( ) DATVEXPRESS Use DATV Express connected by USB │ | │ ( ) DATVEXPRESS Use DATV Express connected by USB │ | ||
│ ( ) IP Transmit on IP network │ | │ ( ) IP Transmit on IP network │ | ||
| + | │ ( ) COMPVID Output PAL Comp Video from Raspberry Pi AV Socket │ | ||
| + | |||
| + | Receive Menu | ||
| + | |||
| + | │ 1 Receive DATV Use the RTL to Receive with same settings as transmit │ | ||
| + | │ 2 Start RTL-TCP Start the RTL-TCP Server for use with SDR Sharp │ | ||
| + | │ 3 Stop RTL-TCP Stop the RTL-TCP Server │ | ||
System Setup Menu | System Setup Menu | ||
| Line 97: | Line 109: | ||
Autostart Menu | Autostart Menu | ||
| − | │ ( ) Prompt | + | │ ( ) Prompt Log-on to Linux Command Prompt │ |
| − | │ (*) Console | + | │ (*) Console Log-on to Portsdown Console Menu │ |
| − | │ ( ) TX_boot | + | │ ( ) TX_boot Boot-up to Transmit │ |
| − | │ ( ) Display_boot | + | │ ( ) Display_boot Boot-up to Touchscreen Display │ |
| − | │ ( ) Button_boot | + | │ ( ) TestRig_boot Boot-up to Test Rig for F-M Boards │ |
| + | │ ( ) Button_boot Boot-up to Button Control │ | ||
| + | │ ( ) Keyed_Stream_boot Boot up to Keyed Repeater Streamer │ | ||
| + | │ ( ) Cont_Stream_boot Boot up to Always-on Repeater Streamer │ | ||
| + | │ ( ) Keyed_TX_boot Boot up to GPIO Keyed Transmitter │ | ||
Display type Menu | Display type Menu | ||
| Line 108: | Line 124: | ||
│ ( ) HDMITouch HDMI touchscreen │ | │ ( ) HDMITouch HDMI touchscreen │ | ||
│ (*) Waveshare Waveshare 3.5 A LCD (default) │ | │ (*) Waveshare Waveshare 3.5 A LCD (default) │ | ||
| − | │ ( | + | │ ( ) WaveshareB Waveshare 3.5 B LCD (alternative) │ |
│ ( ) Console Network Console │ | │ ( ) Console Network Console │ | ||
| Line 124: | Line 140: | ||
│ 10 Back-up Settings Save Settings to a USB drive │ | │ 10 Back-up Settings Save Settings to a USB drive │ | ||
│ 11 Load Settings Load settings from a USB Drive │ | │ 11 Load Settings Load settings from a USB Drive │ | ||
| − | |||
Language Selection Menu | Language Selection Menu | ||
| Line 137: | Line 152: | ||
Shutdown Menu | Shutdown Menu | ||
| − | │ | + | │ 1 Shutdown now Immediate Shutdown │ |
| − | │ | + | │ 2 Reboot now Immediate reboot │ |
| − | │ | + | │ 3 Exit to Linux Exit menu to Command Prompt │ |
| − | │ | + | │ 4 Restore TouchScreen Exit to LCD. Use ctrl-C to return │ |
| − | │ | + | │ 5 Start Keyed TX Start the GPIO keyed Transmitter │ |
| − | │ | + | │ 6 Start Keyed Streamer Start the keyed Repeater Streamer │ |
| + | │ 7 Start Constant Streamer Start the constant Repeater Streamer │ | ||
| + | │ 8 Start Test Rig Test rig for pre-sale testing of FM Boards │ | ||
| + | │ 9 Button Enable Enable Shutdown Button │ | ||
| + | │ 10 Button Disable Disable Shutdown Button │ | ||
Revision as of 20:41, 16 October 2017
The Console provides a means to configure all aspects of the Portsdown Transmitter Software, as well as providing an interface to operate the transmitter.
Entering console mode
If your Portsdown transmitter is normally configured to boot up and be used in Touchscreen mode and you want to change some parameters such as station name, simply follow this procedure.
The process is very similar to initial set up and is done by using an external PC running an SSH Terminal application such as Putty.
- Connect the RPi to the same network as your PC, and turn the Portsdown on. If you already have a touch screen on your Portsdown, note down the IP address displayed when the system boots.
If you do not have a touch screen connected use the IP Scanner program to find the IP address of your RPi.
- Open Putty and enter the IP address of your RPi and open a connection. At the logon prompt enter the default username of pi and the password. The default password is raspberry - but you may have changed this.
As the Portsdown transmitter is still in touchscreen mode, the putty window will be showing the keyboard commands - try pressing a button on the Touchscreen and you will see the command displayed.
To exit Touchscreen mode press the "Ctrl" and "C" keys on the PC keyboard simultaneously - the Touchscreen will go blank, the console menu will start automatically and you will see the following screen:
Note, if the console menu does not appear and you end up at the Linux Command Line, you can get back to the Main Console Menu by typing: /home/pi/rpidatv/scripts/menu.sh menu
You can now make any changes you require (see initial setup for details on options) and as long as you do not change the autostart configuration, the Portsdown will automatically boot back in to Touchscreen mode when restarted.
Note - in all menus press the up and down PC keyboard arrows to highlight the item that you require and then the space bar to select it (don’t forget this!). Then press Enter to make the changes and return to the main menu.
Menu options
This page lists the menu options that are available as at Software Version 201710081.
Main Menu
│ 0 Transmit 437 Mhz, 333 KS, FEC 7/8. │ │ 1 Source Select Video Source (DESKTOP selected) │ │ 2 Output Configure Output (QPSKRF selected) │ │ 3 Station Station call setup │ │ 4 Receive Receive via rtlsdr │ │ 5 System System setup │ │ 6 System 2 Advanced System Setup │ │ 7 Language Set Language and Keyboard │ │ 8 Shutdown Shutdown and reboot options │
Source Menu
│ ( ) CAMH264 Pi Camera, H264 Encoding │ │ ( ) CAMMPEG-2 Pi Camera, MPEG-2 Encoding (for old Sat RX) │ │ ( ) FILETS Play a Transport stream file (.ts) │ │ ( ) PATERNAUDIO JPEG Pictures From File (no audio) │ │ ( ) CARRIER Carrier with no Modulation │ │ ( ) TESTMODE Testmode for Carrier Null │ │ ( ) IPTSIN Transport stream from network │ │ ( ) ANALOGCAM Analog (EasyCap) Video Input │ │ ( ) VNC Show PC Desktop via VNC │ │ (*) DESKTOP Show Touchscreen or Raspberry Pi Display │ │ ( ) CONTEST Show Contest Numbers │ │ ( ) ANALOGMPEG-2 MPEG-2 and sound from Comp Video Input │
Output Menu
│ 1 SymbolRate Symbol Rate Setup │ │ 2 FEC FEC Setup │ │ 3 Output mode Output Mode │ │ 4 PID PID setup │ │ 5 Frequency Output frequency(MHZ) │ │ 6 Caption Callsign Caption in MPEG-2 on/off │
FEC Menu
| ( ) 1 1/2 │ │ ( ) 2 2/3 │ │ ( ) 3 3/4 │ │ ( ) 5 5/6 │ │ (*) 7 7/8 │
Output Mode Menu
│ ( ) IQ IQ output for Portsdown filter modulator board │ │ (*) QPSKRF UGLY Test Mode. RF from pin 32. No modulator required.│ │ ( ) BATC Stream to BATC.TV │ │ ( ) STREAMER Stream to other Streaming Facility │ │ ( ) DIGITHIN Use Digithin Modulator Card │ │ ( ) DTX1 Use DTX1 TS Extender Card │ │ ( ) DATVEXPRESS Use DATV Express connected by USB │ │ ( ) IP Transmit on IP network │ │ ( ) COMPVID Output PAL Comp Video from Raspberry Pi AV Socket │
Receive Menu
│ 1 Receive DATV Use the RTL to Receive with same settings as transmit │ │ 2 Start RTL-TCP Start the RTL-TCP Server for use with SDR Sharp │ │ 3 Stop RTL-TCP Stop the RTL-TCP Server │
System Setup Menu
│ 1 Autostart Automatic startup │ │ 2 Display Display type │ │ 3 IP IP Address │ │ 4 WiFi Set-up SSID and password │ | 5 WiFi Off Turn the WiFi Off │ │ 6 Enable DigiThin Not Implemented Yet │ │ 7 Set-up EasyCap Set input socket and PAL/NTSC │ │ 8 Audio Input Select USB Dongle or EasyCap │ │ 9 Update Check for Updated rpidatv Software │
Autostart Menu
│ ( ) Prompt Log-on to Linux Command Prompt │ │ (*) Console Log-on to Portsdown Console Menu │ │ ( ) TX_boot Boot-up to Transmit │ │ ( ) Display_boot Boot-up to Touchscreen Display │ │ ( ) TestRig_boot Boot-up to Test Rig for F-M Boards │ │ ( ) Button_boot Boot-up to Button Control │ │ ( ) Keyed_Stream_boot Boot up to Keyed Repeater Streamer │ │ ( ) Cont_Stream_boot Boot up to Always-on Repeater Streamer │ │ ( ) Keyed_TX_boot Boot up to GPIO Keyed Transmitter │
Display type Menu
│ ( ) Tontec35 Tontec 3.5 inches │ │ ( ) HDMITouch HDMI touchscreen │ │ (*) Waveshare Waveshare 3.5 A LCD (default) │ │ ( ) WaveshareB Waveshare 3.5 B LCD (alternative) │ │ ( ) Console Network Console │
Advanced System Setup Menu
│ 1 Set Presets For Touchscreen Frequencies │ │ 2 Set Presets For Touchscreen Symbol Rates │ │ 3 ADF4351 Ref Freq Set ADF4351 Reference Freq and Cal │ │ 4 ADF4351 Levels Set ADF4351 Levels for Each Band │ │ 5 DATV Express Configure DATV Express Settings for each band │ │ 6 Contest Numbers Set Contest Numbers for each band │ │ 7 Viewfinder Disable or Enable Viewfinder on Touchscreen │ │ 8 SD Card Info Show SD Card Information │ │ 9 Factory Settings Restore Initial Configuration │ │ 10 Back-up Settings Save Settings to a USB drive │ │ 11 Load Settings Load settings from a USB Drive │
Language Selection Menu
│ 1 French Menus Menus Francais │ │ 2 English Menus Change Menus to English │ │ 3 German Menus Menüs auf Deutsch wechseln │ │ 4 French Keyboard Needs reboot after setting │ │ 5 UK Keyboard Needs reboot after setting │ │ 6 US Keyboard Needs reboot after setting │
Shutdown Menu
│ 1 Shutdown now Immediate Shutdown │ │ 2 Reboot now Immediate reboot │ │ 3 Exit to Linux Exit menu to Command Prompt │ │ 4 Restore TouchScreen Exit to LCD. Use ctrl-C to return │ │ 5 Start Keyed TX Start the GPIO keyed Transmitter │ │ 6 Start Keyed Streamer Start the keyed Repeater Streamer │ │ 7 Start Constant Streamer Start the constant Repeater Streamer │ │ 8 Start Test Rig Test rig for pre-sale testing of FM Boards │ │ 9 Button Enable Enable Shutdown Button │ │ 10 Button Disable Disable Shutdown Button │