146 MHz amplifiers: Difference between revisions

From BATC Wiki
Jump to navigation Jump to search
Created page with "* Rob M0DTS published an easy to construct design using the RD series of FETs in CQ-TV 247 and 249 - a good way to get a clean 5 watts on 146 MHz. (The full article is availa..."
 
No edit summary
Line 1: Line 1:
* Rob M0DTS published an easy to construct design using the RD series of FETs in CQ-TV 247 and 249 - a good way to get a clean 5 watts on 146 MHz.  (The full article is available in high resolution in the magazine)
===RD series===
 
Rob M0DTS published an easy to construct design using the RD series of FETs in CQ-TV 247 and 249 - a good way to get a clean 5 watts on 146 MHz.  (The full article is available in high resolution in the magazine)


[[File:rd70.JPG|400px]]
[[File:rd70.JPG|400px]]
===Mitsubishi power modules===
The Mitsubshi range of power amplifier modules work well on 146 MHz


* Sam Jewell G4DDK, 8W amplifier kits, pcb, manual etc.
* Sam Jewell G4DDK, 8W amplifier kits, pcb, manual etc.

Revision as of 17:42, 26 March 2017

RD series

Rob M0DTS published an easy to construct design using the RD series of FETs in CQ-TV 247 and 249 - a good way to get a clean 5 watts on 146 MHz. (The full article is available in high resolution in the magazine)

Mitsubishi power modules

The Mitsubshi range of power amplifier modules work well on 146 MHz

  • Sam Jewell G4DDK, 8W amplifier kits, pcb, manual etc.

http://www.g4ddk.com/144MHz8WPA.pdf

  • Anglia Live, suppliers of Mitsubishi power modules

http://www.anglia-live.com/products/rf-products/rf-discretes-modules/rf-mosfets/list/perpage/21/page/1

  • 60W power amplifier pcb (available from G4DDK above)

http://www.ifwtech.co.uk/g3sek/vhfdx/gm3sek-pa-module-board