Difference between revisions of "MiniTioune software"
Jump to navigation
Jump to search
Line 5: | Line 5: | ||
Download the zip file and extract to a folder under your root or c:\ directory. You should have the following files in your directory: | Download the zip file and extract to a folder under your root or c:\ directory. You should have the following files in your directory: | ||
− | [[File:TT | + | [[File:TT directory2.JPG|400px]] |
Revision as of 06:11, 12 May 2017
The MiniTiouner USB receiver uses free to download DVB-S receive and analysis software called "Minitioune" written by F6DZP. The Software is hosted on the VivaDATV forum. You need a log-in to download the software.
The latest (28 February 2017) version of MiniTioune is V0.6d and is the version you will need if you have a Serit tuner. The files is located here: Minitioune v0.6d download
Download the zip file and extract to a folder under your root or c:\ directory. You should have the following files in your directory:
Software Installation
There is a "readme.pdf" in the Minitioune software package that gives the latest information and a step by step guide
For a step by step guide on how to do this, see the paper written by W6HHC - http://www.w6ze.org/DATV/InstallingMiniTiouner_onWin10.pdf
- Install the D2XX drivers 2.12.24 found at http://ftdichip.com/Drivers/D2XX.htm. There's a link in the right column for a setup executable. This stage is missing from W6HHC notes.
- Install LAVfilters CODECs and test the HW board and test the DirectShow filters
- Look in the Minitiouner folder that you've just copied to C:\ for the small program "Install_usrc_ax_winXP" and run this to install the link with the decoder.
- Run the MiniTiouner_v0.6d executable & perhaps adjust the decoder filters being used.