Difference between revisions of "5.6 GHz"

From BATC Wiki
Jump to navigation Jump to search
(Created page with "The units are designed to send First Person Video (FPV) cockpit video from Drones provide a very easy way to get on 5.6 GHz ATV. The typical units are very small but have rea...")
 
Line 1: Line 1:
The units are designed to send First Person Video (FPV) cockpit video from Drones provide a very easy way to get on 5.6 GHz ATV.
+
Amateur TV activity on the 6 cm band is increasing due to the availability of cheap modules intended to transmit “First Person Video” back from drones to their operators.  These units are widely advertised on eBay with titles similar to “Tarot 5.8G 600MW Telemetry TX/RX Combo for FPV Image Transmission TL300N” at reasonable prices.  The receive and transmit frequencies are set using DIP switches, and most tune to our chosen FM ATV simplex frequency of 5665 MHz.  The recommended polarisation is horizontal.
  
The typical units are very small but have reasonable FM-TV performance with a quoted spec of 600 Milliwatts out and receiver sensitivity of -80 dBm.  The best thing is they cover the 6cms Amateur Band and can be used legally just by changing the channel to one inside the band.
+
The typical units are very small but have reasonable FM-TV performance with a quoted spec of 600 milliwatts out and receiver sensitivity of -80 dBm.  Amplifiers are available to raise the output power to 2 watts or more.
 +
 
 +
Using dish aerials of 30 – 60 cm (such as a surplus Sky dish), line of sight ranges of 80 km can easily be achieved.  P5 (noise free) FM ATV pictures were exchanged over an 85 km path using the equipment pictured.

Revision as of 14:07, 14 August 2017

Amateur TV activity on the 6 cm band is increasing due to the availability of cheap modules intended to transmit “First Person Video” back from drones to their operators. These units are widely advertised on eBay with titles similar to “Tarot 5.8G 600MW Telemetry TX/RX Combo for FPV Image Transmission TL300N” at reasonable prices. The receive and transmit frequencies are set using DIP switches, and most tune to our chosen FM ATV simplex frequency of 5665 MHz. The recommended polarisation is horizontal.

The typical units are very small but have reasonable FM-TV performance with a quoted spec of 600 milliwatts out and receiver sensitivity of -80 dBm. Amplifiers are available to raise the output power to 2 watts or more.

Using dish aerials of 30 – 60 cm (such as a surplus Sky dish), line of sight ranges of 80 km can easily be achieved. P5 (noise free) FM ATV pictures were exchanged over an 85 km path using the equipment pictured.