Difference between revisions of "File:PE4032 DIP & SOLDER BLOB Settings.JPG"

Latest revision as of 21:48, 17 October 2017

Attenuator switch and J solder pads for serial operation with the controller

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	21:48, 17 October 2017		3,615 × 3,014 (295 KB)	M0YDH (talk \| contribs)	Right way up for reading
	14:28, 16 October 2017		448 × 336 (75 KB)	M0YDH (talk \| contribs)	Attenuator switch and J solder pads for serial operation with the controller

You cannot overwrite this file.

The following page links to this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 7 Plus
Exposure time	1/6 sec (0.16666666666667)
F Number	f/1.8
ISO speed rating	80
Date and time of data generation	21:16, 13 April 2017
Lens focal length	3.99 mm
Latitude	50° 44′ 25.7″ N
Longitude	1° 52′ 12.74″ W
Altitude	30.975 metres above sea level
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	10.3.1
File change date and time	21:16, 13 April 2017
Y and C positioning	Centred
Exposure Programme	Normal programme
Exif version	2.21
Date and time of digitising	21:16, 13 April 2017
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	2.6252573781743
APEX aperture	1.6959937156324
APEX brightness	-0.20127157129882
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	896
DateTimeDigitised subseconds	896
Supported Flashpix version	1
Colour space	Uncalibrated
Sensing method	One-chip colour area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	2.0941828254848
Focal length in 35 mm film	66 mm
Scene capture type	Standard
GPS time (atomic clock)	20:16
Speed unit	Kilometres per hour
Speed of GPS receiver	5.7937065051968E-8
Reference for direction of image	True direction
Direction of image	31.663141993958
Reference for bearing of destination	True direction
Bearing of destination	31.663141993958
GPS date	13 April 2017

Revision as of 14:28, 16 October 2017 (view source) M0YDH (talk \| contribs) (Attenuator switch and J solder pads for serial operation with the controller)	Latest revision as of 21:48, 17 October 2017 (view source) M0YDH (talk \| contribs) (M0YDH uploaded a new version of File:PE4032 DIP & SOLDER BLOB Settings.JPG)
(No difference)