Difference between revisions of "The Portsdown DATV transceiver system"
| Line 1: | Line 1: | ||
| + | * [[Introduction]] | ||
| + | * [[Installation]] | ||
The Portsdown DATV transmitter project provides an easy way to “get on air” with Digital ATV at a relatively low cost, covers most of the common modes and involves some basic construction. | The Portsdown DATV transmitter project provides an easy way to “get on air” with Digital ATV at a relatively low cost, covers most of the common modes and involves some basic construction. | ||
| Line 10: | Line 12: | ||
There is also an accompanying Portsdown receiver project - more details can be [[The Portsdown Receiver|found here.]] | There is also an accompanying Portsdown receiver project - more details can be [[The Portsdown Receiver|found here.]] | ||
| − | |||
| − | |||
| − | |||
Revision as of 12:50, 3 January 2017
The Portsdown DATV transmitter project provides an easy way to “get on air” with Digital ATV at a relatively low cost, covers most of the common modes and involves some basic construction.
The aim is to enable an amateur operator with little or no knowledge of Digital ATV to construct the hardware elements, load and configure the software and use the system to send live Digital ATV signals across town on his existing aerials. It will include the new DX RB-TV modes and the ability to receive and transmit to local repeaters using the more traditional 2 and 4 Msymbol DATV modes.
It is based around a Raspberry Pi3 and uses a touch screen LCD to control all the common functions.
There is also an accompanying Portsdown receiver project - more details can be found here.