Ryde remote controls

From BATC Wiki
Revision as of 12:58, 14 July 2020 by G8GTZ (talk | contribs)
Jump to navigation Jump to search

The Ryde DATV receiver is designed to work with an Infrared remote control handset.

Infrared sensor

A Infrared sensor is needed and can be one salvaged from an old consumer electronic part or purchased new - typical example is https://uk.farnell.com/vishay/tsop2438/ir-receiver-45m-0-12mw-m2-side/dp/4913097

Infrared-Sensors.jpg

These sensors are 3 legged devices with +ve, gnd and output which is connected directly to pin x of the RPi GPIO port.

Older devices may need to be used on a +5v supply and if that

Retrieved from ‘https://wiki.batc.org.uk/index.php?title=Ryde_remote_controls&oldid=7231’