Ryde GPIO breakout

From BATC Wiki
Revision as of 10:07, 31 July 2020 by G0MJW (talk | contribs)
Jump to navigation Jump to search

To help constructors connect easily to the Ryde RPIO, BATC has produced a small daughter board - PCBs will be available in the BATC shop.

Ryde1.png

Construction notes

  • Note the GPIO board requires 5v NOT 12v!
  • The GPIO header is placed on the opposite side of the PCB to the rest of the components.

Bill of materials

A full bill of materials will follow but the schematic is shown below.

Ryde GPIO6.png

Ryde GPIO 1.jpg

Retrieved from ‘https://wiki.batc.org.uk/index.php?title=Ryde_GPIO_breakout&oldid=7360’