Difference between revisions of "DVB-S Demodulator GUI"

From BATC Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 46: Line 46:
 
When first running the program, the following screen will be shown....
 
When first running the program, the following screen will be shown....
  
[[File:m0mux_3.png|center|400px]]
+
[[File:m0mux_3.png|center|600px]]
  
  
Ensure you...
+
First select the...
  
  
Line 60: Line 60:
  
 
===Decoding signals===
 
===Decoding signals===
 +
 +
==FAQ==

Latest revision as of 13:11, 2 May 2019

The DVB-S Demod-GUI program is written by Marcell Kroner to receive and decode DVB-S and DVB-S2 signals. Hardware supported includes LimeSDR, Pluto and the £10 RTL SDR dongle.


Demod-GUI specifications

The program will receive and demodulate DVB-S and DVB-S2 signals with a maximum symbol rate of and minimum rate of....


PC requirements

Due to the processing required to receive and demodulate DVB-S and S2 a reasonable spec PC is reguired. The follow is the minimum specification recommended:

  • processor =
  • Memory =
  • SSD drive


OS requirements

The program will run under Windows 10.....

SDR hardware supported

The program supports the following hardware:

  • LimeSDR
  • Pluto
  • RTL Dongle


Installation

The program can be downloaded from....

Install the program by running the exe?

Plug in the SDR hardware before running the program.


Running Demod-GUI for the first time

When first running the program, the following screen will be shown....

M0mux 3.png


First select the...


Setting frequency

Setting SR and FEC

Decoding signals

FAQ