Difference between revisions of "Filter Modulator build"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
* A full parts list will be published on this page and you can then order the parts from your own supplier. | * A full parts list will be published on this page and you can then order the parts from your own supplier. | ||
| − | + | '''Board information''' | |
| − | |||
*[[Media:RBTVMOD_30_SS_TOP.pdf|Top layout]] | *[[Media:RBTVMOD_30_SS_TOP.pdf|Top layout]] | ||
*[[:Media:RBTVMOD 30 SS BOT.pdf|Bottom layout]] | *[[:Media:RBTVMOD 30 SS BOT.pdf|Bottom layout]] | ||
| + | |||
| + | *[[:Media:RBTVMOD 30 BLOCK.pdf| Block diagram]] | ||
| + | |||
| + | *[[:Media:RBTVMOD 30 SCH P1.pdf| Circuit schematic - part 1]] | ||
| + | |||
| + | *[[:Media:RBTVMOD 30 SCH P2.pdf| Circuit schematic - part 2]] | ||
| + | |||
| + | *[[:Media:RBTVMOD 30 SCH P3.pdf| Circuit schematic - part 3]] | ||
Revision as of 17:58, 18 January 2017
There are a number of ways to get a Portsdown filter modulator board which is the only custom hardware required for the project.
- Once the design is finalised, built and tested Portsdown modulator boards will be available from the BATC shop This is the easiest way but there will be a delay whilst they are manufactured and tested.
For those wanting to construct the board themselves, the blank PCB will also be made available from the BATC shop
- We will publishing a bare bones parts list, or Bill of Materials, as an .xls file which you can upload to Digikey - you then simply checkout and pay Digikey and it will automatically order all the parts you require to construct the board which will arrive bagged up marked with circuit references. This is the recommended way to order your parts if you decide to build the board yourself.
- A full parts list will be published on this page and you can then order the parts from your own supplier.
Board information