Difference between revisions of "Es'hail-2 Ground Station"

From BATC Wiki
Jump to navigation Jump to search
 
(4 intermediate revisions by 2 users not shown)
Line 5: Line 5:
  
  
The equipment is housed in a room dedicated to amateur radio infrastructure in the workshops building for the now defunct GHY2 90 ft dish antennae, built in 1969.  The station currently houses:
+
The equipment is housed in a room dedicated to amateur radio infrastructure in the workshops building for the now defunct GHY2 90 ft dish antennae, built in 1969.   
  
* Qatar Oscar 100 WebSDR - https://vhf-goonhilly.batc.org.uk/
+
The station currently houses the following facilities available for use by anyone worldwide:
  
* Qatar Oscar 100 spectrum monitor - https://eshail.batc.org.uk/wb/
+
* Qatar Oscar 100 Narrow Band WebSDR - https://eshail.batc.org.uk/nb/
 +
 
 +
* Qatar Oscar 100 Wide Band (DATV) spectrum monitor - https://eshail.batc.org.uk/wb/
  
 
* AMSAT-UK Funcube ground station
 
* AMSAT-UK Funcube ground station
Line 16: Line 18:
  
 
* Kiwi HF WebSDR with GPS TDOA
 
* Kiwi HF WebSDR with GPS TDOA
 +
 +
More recent photos of the equipment taken by M0DNY during a maintenance visit on 19 March 2021:
 +
 +
[[File:20210319 Dish.jpg|400px]] [[File:20210319 Equipment Room.jpg|400px]]
  
  
Line 84: Line 90:
 
A high-bandwidth Leo Bodnar NTP Server provides NTP service to the station & the worldwide NTP Pool. Stats and graphs of this service can be viewed at https://eshail.batc.org.uk/ntp/
 
A high-bandwidth Leo Bodnar NTP Server provides NTP service to the station & the worldwide NTP Pool. Stats and graphs of this service can be viewed at https://eshail.batc.org.uk/ntp/
  
[[File:GHY2 Desk.jpg|400px]]
+
[[File:GHY2_Desk_20241113.jpg|400px]]
  
 
==Using the Wideband spectrum monitor and Narrow band SDR==
 
==Using the Wideband spectrum monitor and Narrow band SDR==

Latest revision as of 11:48, 23 November 2024

The BATC & AMSAT-UK QO-100 (Es'hail-2) WebSDR & Spectrum Monitor are located at the iconic Goonhilly Earth Station in Cornwall (IO70JB).

GH view.JPG GH room.JPG


The equipment is housed in a room dedicated to amateur radio infrastructure in the workshops building for the now defunct GHY2 90 ft dish antennae, built in 1969.

The station currently houses the following facilities available for use by anyone worldwide:

  • AMSAT-UK Funcube ground station
  • Kiwi HF WebSDR with GPS TDOA

More recent photos of the equipment taken by M0DNY during a maintenance visit on 19 March 2021:

20210319 Dish.jpg 20210319 Equipment Room.jpg


RF System

GHY RF System Block V1.jpg

Dish

The original dish installed in August 2018 was a consumer model and suffered damage in strong winds during October 2018.

This was replaced in January 2019 with a heavy duty Hirschmann 1.3m offset dish.

GHY200 Dish.JPG GH Dish.JPG

RF Front End

A modified Octagon quad LNB is mounted on the dish and locked to the 25 MHz output from a Leo Bodnar GPSDO.

See https://wiki.batc.org.uk/Es%27hail-2_LNBs_and_Antennaes for more details on the locking modifications

The 25 MHz reference is fed to the LNB through a dedicated coax run, and 2 further coax runs are used to feed separate horizontal & vertical feeds back to the equipment room.

Receivers

2 separate AirSpy USB SDR Receivers, locked to a 10MHz output from the LeoBodnar GPSDO, are used for the WebSDR and Spectrum monitor.

MainTray2.jpg


RearPanel2.jpg

GPS reference

The GPS reference is a Leo Bodnar unit, running firmware version 1.12, programmed to produced 10 MHz (for the Airspys) and 25 MHz for the LNB. The settings for the reference to produce these 2 frequencies were not straightforward (as the 2 outputs on the Leo Bodnar unit need to be linked) but are here for reference:

Computer System

GHY Software Block V1.jpg

Hardware

The WebSDR & Spectrum Monitor both run off a single machine with the following hardware specification:

  • Intel i7-2600 CPU
  • 16GB DDR3 RAM
  • Intel DQ67SW Motherboard
  • 500GB Samsung 850 EVO SSD

Software

Networking

Goonhilly Earth Station has 2x diverse redundant 10Gb links into London Datacenters through Next Connex. They have been kind enough to give us a dedicated IP address and access to >300Mb/s of up & down bandwidth for use by the station.

A pfsense firewall running on a PC Engines APU2D4 board is used as the station router & firewall.

A high-bandwidth Leo Bodnar NTP Server provides NTP service to the station & the worldwide NTP Pool. Stats and graphs of this service can be viewed at https://eshail.batc.org.uk/ntp/

GHY2 Desk 20241113.jpg

Using the Wideband spectrum monitor and Narrow band SDR

Wideband monitor

The Wideband Spectrum Monitor can be accessed at https://eshail.batc.org.uk/wb/

To log in, type the following in to the box at the bottom of the chat (replacing "my name" with your real name or callsign) and press return:

/nick my name

For example:

/nick G8ABC_Fred


You will get a confirmation message that your name has changed and the text in the box changes to "Type a message here and press enter" - your name also appears in the list on the right handside of the page.

Narrow band SDR

The Narrowband WebSDR can be accessed at https://eshail.batc.org.uk/nb/

This user guide written for the Farnham websdr gives a detailed description on how to use the web sdr http://farnham-sdr.com/WebSDR-User-Guide.pdf

The chat facility is actually an dedicated IRC channel and to access it, enter your name or callsign in the "nickname" box, tick "I am not a robot and press "connect"