Difference between revisions of "MiniTioune"
| (28 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | The MiniTioune receiver project, developed by Jean-Pierre F6DZP, consists of the home constructed MiniTiouner hardware which interfaces via a standard USB 2.0 port to a Windows PC running the MiniTioune software. | + | The MiniTioune receiver project, developed by Jean-Pierre F6DZP, consists of the home constructed MiniTiouner hardware which interfaces via a standard USB 2.0 port to a Windows PC running the MiniTioune software. |
| + | The MiniTiouner hardware can also be used with the BATC [[Ryde Introduction|Ryde set-top box receiver]] running on a Raspberry Pi4 or the Portsdown DATV transceiver, the Portsdwon receiver or OpenTuner software. | ||
| − | [[File:Serit complete | + | [[File:Serit complete.jpg|300px]] |
| − | It will receive DVB-S QPSK and DVB-S2 QPSK, 8PSK, 16APSK, 32 APSK from broadcast and amateur TV transmissions with symbol rates (SR) from 30 Msymbols down to | + | It will receive DVB-S QPSK and DVB-S2 QPSK, 8PSK, 16APSK, 32 APSK from broadcast and amateur TV transmissions with symbol rates (SR) from 30 Msymbols down to 66Ks Ksymbols per second. |
| − | It can be used to receive satellite broadcasts, "normal" DATV signals and is the ONLY system capable of receiving [[Reduced bandwidth TV|Reduced Bandwidth (RB-TV)]] transmissions. | + | It can be used to receive satellite broadcasts, "normal" DATV signals and is the ONLY system capable of receiving [[Reduced bandwidth TV|Reduced Bandwidth (RB-TV)]] transmissions making it ideal for use on Es'hail-2 without any external frequency converters. |
===Definitions=== | ===Definitions=== | ||
| Line 17: | Line 18: | ||
* '''MiniTiouner''' = The complete project hardware with USB interface - this can be prefixed with the type of tuner eg "Sharp Minitiouner" | * '''MiniTiouner''' = The complete project hardware with USB interface - this can be prefixed with the type of tuner eg "Sharp Minitiouner" | ||
| + | |||
| + | The BATC Portsdown DATV transceiver and BATC Ryde Set top Box Receiver also use the MiniTiouner hardware - more information on the BATC Ryde Receiver can be found here [[Ryde Introduction]] | ||
| + | |||
| + | ===Specifications=== | ||
| + | |||
| + | * Frequency coverage = 143 > 2450MHz (covers amateurs bands and extended sateliite band without external converters) | ||
| + | |||
| + | * Symbol rate = 66ks > 30 Msymbols (suitable for RB-TV and satellite reception). | ||
| + | |||
| + | * Transmission modes = DVBS and DVBS2 all modulations from QPSK to 32 APSK | ||
| + | |||
| + | ====Signal input level==== | ||
| + | The Serit 4334 NIM or tuner is designed to be used in a satellite receive system fed by an LNB on the dish with ~55dB of gain To compensate for this, MiniTiouner must always be used with external preamp followed by a satellite line amplifier when used to receive terrestrial signals. | ||
| + | |||
| + | For more details see [[MiniTiouner Power Level Indication|this wiki page]] | ||
=== Hardware overview === | === Hardware overview === | ||
| − | The MiniTiouner hardware has no surface mount components and requires medium level constructional skills. BATC sells the hard to get components and the | + | The MiniTiouner hardware has no surface mount components and requires medium level constructional skills. BATC sells the hard to get components and the rest are available from normal suppliers. |
| − | Full details of the MiniTiouner hardware and build information are [[Minitiouner Hardware|available here]]. | + | Full details of the current version 2 MiniTiouner hardware and build information are [[MiniTiouner_hardware_Version_2|available here]] - new builders should start on this page. |
| + | |||
| + | Details of the previous hardware versions [V1 using the Sharp and Eardtek NIMs and V1.2 using the adaptor board are [[Minitiouner Hardware|available here.]]. | ||
| + | |||
| + | In CQ-TV269, Dave G8GKQ wrote Replacing a Sharp Tuner with a Serit' - which upgrades a V1 to a V2 Minitiouner with a flat form factor. This uses the schematic of the [[MiniTiouner_hardware_Version_1|NIM adaptor board for reference.]] | ||
=== Software === | === Software === | ||
| − | Full details of the MiniTioune software designed to be used with the MiniTiouner hardware are available here [[MiniTioune software]]. | + | Full details of the MiniTioune software which is free to download and designed to be used with the MiniTiouner hardware are available here [[MiniTioune software]]. |
[[File:20160507 Walbury GW8VPG.jpg|400px]] | [[File:20160507 Walbury GW8VPG.jpg|400px]] | ||
| + | |||
| + | ZR6TG has developed Windows software to run on the same hardware as the MiniTiouner software. See this wiki page for more details [[OpenTuner]] | ||
===Band Pass filters=== | ===Band Pass filters=== | ||
| Line 36: | Line 58: | ||
=== Receive upconverters === | === Receive upconverters === | ||
| − | The | + | The Serit tuner currently on sale in the shop covers 143 - 2450 MHz and does not require any external frequency converters. |
| − | |||
| − | |||
| − | + | However, the original Sharp and Eardatek tuner components (also called NIM) used in MiniTiouner cover a maximum of 650 to 2600 MHz. This covers the 23cms (1.3 GHz) and 13cms (2.3 GHz) amateur bands it does not provide coverage of 146 (2mts) and 437 MHz (70cms) where the majority of ATV operation takes place. Therefore we need to use an upconverter in front of the tuner which converts 146 MHz and 437 MHz up to an L band frequency that the MiniTiouner will receive. | |
[[Receiver upconverters|A separate section on the wiki gives details of these upconverters.]] | [[Receiver upconverters|A separate section on the wiki gives details of these upconverters.]] | ||
Latest revision as of 14:42, 12 March 2024
The MiniTioune receiver project, developed by Jean-Pierre F6DZP, consists of the home constructed MiniTiouner hardware which interfaces via a standard USB 2.0 port to a Windows PC running the MiniTioune software.
The MiniTiouner hardware can also be used with the BATC Ryde set-top box receiver running on a Raspberry Pi4 or the Portsdown DATV transceiver, the Portsdwon receiver or OpenTuner software.
It will receive DVB-S QPSK and DVB-S2 QPSK, 8PSK, 16APSK, 32 APSK from broadcast and amateur TV transmissions with symbol rates (SR) from 30 Msymbols down to 66Ks Ksymbols per second.
It can be used to receive satellite broadcasts, "normal" DATV signals and is the ONLY system capable of receiving Reduced Bandwidth (RB-TV) transmissions making it ideal for use on Es'hail-2 without any external frequency converters.
Definitions
The following terms should be used when describing this project - note "MiniTiouner" is the French project name but maybe pronounced "Minituner" in English.
- MiniTioune = PC software
- MiniTiouner = The complete project hardware with USB interface - this can be prefixed with the type of tuner eg "Sharp Minitiouner"
The BATC Portsdown DATV transceiver and BATC Ryde Set top Box Receiver also use the MiniTiouner hardware - more information on the BATC Ryde Receiver can be found here Ryde Introduction
Specifications
- Frequency coverage = 143 > 2450MHz (covers amateurs bands and extended sateliite band without external converters)
- Symbol rate = 66ks > 30 Msymbols (suitable for RB-TV and satellite reception).
- Transmission modes = DVBS and DVBS2 all modulations from QPSK to 32 APSK
Signal input level
The Serit 4334 NIM or tuner is designed to be used in a satellite receive system fed by an LNB on the dish with ~55dB of gain To compensate for this, MiniTiouner must always be used with external preamp followed by a satellite line amplifier when used to receive terrestrial signals.
For more details see this wiki page
Hardware overview
The MiniTiouner hardware has no surface mount components and requires medium level constructional skills. BATC sells the hard to get components and the rest are available from normal suppliers.
Full details of the current version 2 MiniTiouner hardware and build information are available here - new builders should start on this page.
Details of the previous hardware versions [V1 using the Sharp and Eardtek NIMs and V1.2 using the adaptor board are available here..
In CQ-TV269, Dave G8GKQ wrote Replacing a Sharp Tuner with a Serit' - which upgrades a V1 to a V2 Minitiouner with a flat form factor. This uses the schematic of the NIM adaptor board for reference.
Software
Full details of the MiniTioune software which is free to download and designed to be used with the MiniTiouner hardware are available here MiniTioune software.
ZR6TG has developed Windows software to run on the same hardware as the MiniTiouner software. See this wiki page for more details OpenTuner
Band Pass filters
There is a whole section of the wiki dedicated to this most important part of your system - take a look at the pictures on the top of this page to see why you must use filters before your MiniTiouner!
Receive upconverters
The Serit tuner currently on sale in the shop covers 143 - 2450 MHz and does not require any external frequency converters.
However, the original Sharp and Eardatek tuner components (also called NIM) used in MiniTiouner cover a maximum of 650 to 2600 MHz. This covers the 23cms (1.3 GHz) and 13cms (2.3 GHz) amateur bands it does not provide coverage of 146 (2mts) and 437 MHz (70cms) where the majority of ATV operation takes place. Therefore we need to use an upconverter in front of the tuner which converts 146 MHz and 437 MHz up to an L band frequency that the MiniTiouner will receive.
A separate section on the wiki gives details of these upconverters.