Difference between revisions of "SUP2400 mods"

From BATC Wiki
Jump to navigation Jump to search
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
In order to receive 437 MHz (70cms) DATV on a standard satellite STB, you need to up convert the signal to L band. Luckily there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box. The units are made by a company called Zinwell and known as SUP-2400. They are available on ebay but only in the US and so are stocked in the [https://batc.org.uk/shop/hardware-and-kits BATC shop].
+
In order to receive 437 MHz (70cms) DATV on a standard satellite STB or early MiniTiouners with Sharp or Eardtek tuners, you need to up convert the signal to L band. Current, version 2, MiniTiouners or PicoTuners using the Serit FTS-4334 (or FTS-4335) tuner cover from 144 MHz to 2450 MHz, so no up-conversion is required.
  
However, before use on 70cms, they either require hardware modification as described in CQ-TV 239 and the document available for download further down this page, or the use of the Diseqc controller as described in CQ-TV 250 - [[SUP2400 DiSEqC|details available here]] - to work on DATV.
+
For up-conversion (only required for standard Satellite STBs or very old version 1 MiniTiouners) there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box.  
  
[[:Media:Zinwell 70cms DATV up converter CQTV v2.pdf|This document describes the hardware modifications.]]
+
However, before use on 70cms, they either require hardware modification as described in CQ-TV 239 or the use of the Diseqc controller as described in CQ-TV 250.
 +
 
 +
* [[SUP2400 DiSEqC| This page on the wiki describes the Disecq controller]]
 +
 
 +
* [[:Media:Zinwell 70cms DATV up converter CQTV v2.pdf|Details of the hardware modifications are available here.]]

Latest revision as of 18:52, 17 May 2026

In order to receive 437 MHz (70cms) DATV on a standard satellite STB or early MiniTiouners with Sharp or Eardtek tuners, you need to up convert the signal to L band. Current, version 2, MiniTiouners or PicoTuners using the Serit FTS-4334 (or FTS-4335) tuner cover from 144 MHz to 2450 MHz, so no up-conversion is required.

For up-conversion (only required for standard Satellite STBs or very old version 1 MiniTiouners) there is a consumer device available in the USA which is used on cable networks to up convert UHF signals to L Band where they are then received on a standard satellite box.

However, before use on 70cms, they either require hardware modification as described in CQ-TV 239 or the use of the Diseqc controller as described in CQ-TV 250.